Primesat 1.0m aluminium dish
Light grey only. High Quality. High Gain. Aluminium. Easy adjust.
This
aluminium dish has a total weight of only 6.1Kg. (A steel 1.0m weighs 9.3Kg.) The
gain is a massive 40.3dB at
12.75GHhz and the finish is Polyester RAL7035
powder coating. This
Primesat 1.0m dish is ideal for many satellites when
used in the UK. The easy adjust AZEL mount on the back of the dish (where elevation is adjusted) is galvanised. It will clamp
to poles from 35mm to 60mm diameter. Please note, the pictures show a dark grey dish but it is only available in
light grey.
Primesat 1.0m aluminium dish. Low cost, high quality, high gain. Light grey.
Order code PRI101ON
Temporarily out of stock.
The 1.1m aluminium dishes are in stock below.
The 1.0m heavy duty fibre glass dishes are in stock below.
Primesat 1.1m aluminium satellite dish.
Click on any blue link for more information. Use the browser "back" button to return.
Light grey. High Quality. High Gain. Aluminium. Easy adjust.
This
aluminium dish has a total weight of only 7.4Kg. (A steel 1.1m weighs 10.7Kg.) The gain is a massive
41.2dB
at 12.75GHhz and the coating is Polyester RAL7035
powder coating. It is available in light grey only. Not dark grey
The
easy adjust AZEL mount on the back of the dish (where elevation is adjusted) is
galvanised. Please
note this dish is only available in light grey as shown in top left picture above. This dish is ideal for many satellites
when used in the UK. Extensive testing shows this dish to work very well for the Sky or freesat channels from Astra 2
when tested by customers in the south of France where signal levels are weak. If you draw a line between Bordeaux and Lyon,
above that line a 60-80cm dish will be fine for all of the UK channels from Astra 2 at 28E, however, below that line a larger
dish is needed. If a 60-80cm dish is used below that line, a percentage of channels can still be received but the weaker
channels like
the BBC and ITV need at least a 1.1m dish in the south of France. Please note some channels in some
parts of southern France may be temporarily lost in bad weather with a 1.1m dish. For all weather capability the
Primesat
1.3m dish is available below and provides more gain. Ideal for the south of France near the coast.
Explaining the LNB options - Universal LNBs are used by "world" receivers, freesat non-recordable and Sky HD receivers.
Sky Q™ and Freesat 4K recordable receivers use wideband LNBs. Hybrid LNB with 6 outputs are twin wideband LNBs and a quad
universal LNBs all in the one package. This is ideal if you have different types of receivers in different rooms. To summarise, single,
twin and quad universal LNBs are used with most satellite receivers. Wideband and hybrid LNBs are used with Sky Q™ and freesat
4K recordable. Quatro LNBs are used with multiswitches. Twin wideband LNBs or quatro LNBs can be used with Sky Q™ multiswitches.
Wall mount option. The 480mm stand-off galvanised elbow is available. Long pole
above the gutter low cost wall mounts are
available separately. Heavy duty above the gutter wall mounts can be ordered separately with 2m long, 50mm
diameter poles and
100mm,
300mm,
450mm, and
550mm stand-off distances to clear gutters.
If you live in an area that receives regular snowfall, you may be interested in a satellite dish
heater.
Quality brandname "
Primesat" 1.1m dish with optional LNBs and optional wall mount. Ring us if you need advice. 01207 544664
Shipping information and options. (
VAT info.) (
Stock levels.)
Choose either "
free mainland UK delivery" - UK shipping
option No 1 or
priority options 4-7.
For "
UK offshore islands including Northern Ireland by courier" choose the
£89.00 shipping option.
International - choose the "
International shipping
quote by e-mail" shipping option.
Light grey Primesat 1.1m high gain aluminium satellite dish.
In stock and ready for immediate shipping.
Order code PRI11LG
£189.95
Options, if required, will be automatically added to the dish when you "add to cart" below.
If you are outside of the UK, a 20% VAT refund will be done before shipping.
Primesat 1.3m aluminium satellite dish
Click on any blue link for more information. Use the browser "back" button to return.
High Quality. High Gain. Aluminium. Easy adjust.
Lightweight
aluminium reflector and strong steel box section back support. The gain is a massive
42.8dB at
12.75GHhz and the coating is Polyester RAL7035
powder coating. It is available in light grey. There is an
easy adjust AZEL mount on the back of the dish (where the elevation angle is adjusted). It will clamp to poles
from 48mm to 60mm diameter. Ideal for use in the South of France on the Astra 2 satellite. This 1.3m dish is ideal for
many satellites when used in the UK. Extensive testing shows this dish to work very well for the Sky or freesat channels
from Astra 2 when tested by customers in the south of France where signal levels are weak. If you draw a line between
Bordeaux and Lyon, above that line a 60-80cm dish will be fine for all of the UK channels from Astra 2 at 28E, however,
below that line a larger dish is needed. If a 60-80cm dish is used below that line, a percentage of channels can still
be received but the weaker channels like the BBC and ITV need a 1.3m dish in the south of France.
The 1.3m is also ideal for many other countries including Spain.
Explaining the LNB options - Universal LNBs are used by "world" receivers, freesat non-recordable and Sky HD receivers.
Sky Q™ and Freesat 4K recordable receivers use wideband LNBs. Hybrid LNB with 6 outputs are twin wideband LNBs and a quad
universal LNBs all in the one package. This is ideal if you have different types of receivers in different rooms. To summarise, single,
twin and quad universal LNBs are used with most satellite receivers. Wideband and hybrid LNBs are used with Sky Q™ and freesat
4K recordable. Quatro LNBs are used with multiswitches. Twin wideband LNBs or quatro LNBs can be used with Sky Q™ multiswitches.
Wall mount option. The 480mm stand-off galvanised elbow is available. Long pole
above the gutter low cost wall mounts are
available separately. Heavy duty above the gutter wall mounts can be ordered separately with 2m long, 50mm
diameter poles and
100mm,
300mm,
450mm, and
550mm stand-off distances to clear gutters.
If you live in an area that receives regular snowfall, you may be interested in a satellite dish
heater.
Quality brandname "
Primesat" 1.3m dish with optional LNBs and optional wall mount. Ring us if you need advice. 01207 544664
Shipping information and options. (
VAT info.) (
Stock levels.)
Choose either "
free mainland UK delivery" - UK shipping
option No 1 or
priority options 4-7.
For "
UK offshore islands including Northern Ireland by courier" choose the
£89.00 shipping option.
International - To all locations choose the "
International shipping quote by e-mail" option.
Light grey Primesat 1.3m high gain aluminium dish
In stock and ready for immediate shipping.
Order code PRI13LG
£369.95
Options, if required, will be automatically added to the dish when you "add to cart" below.
If you are outside of the UK, a 20% VAT refund will be done before shipping.
Triax 60cm heavy duty fibre glass dish
Click on any blue link for more information. Use the browser "back" button to return.
Ideal for high wind and high salt areas.
Available in dark grey or cream
This range of heavy duty fibre glass dishes come in two colours and from two manufacturers - Triax (cream and anthracite)
and Cahors (white and dark grey). Sizes are Triax 60cm (featured here), Triax
70cm, Cahors
65cm, Cahors
80cm, and
Cahors
1.0m. 7 different LNB options and hot dipped galvanised wall mount options are also available below.
These are heavy duty high wind load dishes kit ideal for use in high salt "near the coast" locations. Especially ideal for
the high wind and salt areas of the east coast Scotland and Ireland. Clearly the fibre glass dish cannot corrode and the
heavy mount on the back uses a much heavier gauge steel and is hot dipped galvanised. Triax use stainless steel nuts
and bolts. Very high quality dish kits for people who want to solve their satellite dish corrosion problems.
Whilst the pictures show Triax stickers on the dishes, Triax currently do not put stickers on their current range.
Triax cream DAP610 (Triax part number 362610) or dark grey DAP611 (Triax part number 362611).
Explaining the LNB options - Universal LNBs are used by "world" receivers, freesat non-recordable and Sky HD receivers.
Sky Q™ and Freesat 4K recordable receivers use wideband LNBs. Hybrid LNB with 6 outputs are twin wideband LNBs and a quad
universal LNBs all in the one package. This is ideal if you have different types of receivers in different rooms. To summarise, single,
twin and quad universal LNBs are used with most satellite receivers. Wideband and hybrid LNBs are used with Sky Q™ and freesat
4K recordable. Quatro LNBs are used with multiswitches. Twin wideband LNBs or quatro LNBs can be used with Sky Q™ multiswitches.
Wall mount options - The galvanised "U pole" wall mount is adjustable. The dish can be close to the wall if the wall is
south facing or further away from the wall if a larger stand off distance is required. Alternatively there is a very heavy
duty hot dipped galvanised J mount. Long pole
above the gutter wall mounts are also available sepatately.
A quality brandname Triax 60cm dish with optional LNBs and optional wall mount. Ring us if you need advice. 01207 544664.
Shipping information and options. (
VAT info.) (
Stock levels.)
Choose either "
free mainland UK delivery" - UK shipping
option No 1 or
priority options 4-7.
For "
UK offshore islands including Northern Ireland by courier" dishes up
to 80cm choose the £15 - UK shipping option No 2.
International - Republic of Ireland - dishes up to 80cm - choose the £15 "fixed price
multiple items to Eire" shipping option.
International - within the EU - dishes up to 80cm - choose the £38 "1 box up to 20Kg by
courier
to EU countries" shipping option.
International - outside of the EU - all dishes/sizes - choose the "
International shipping
quote by e-mail" shipping option.
Triax 60cm heavy duty fibre glass dish.
In stock and ready for immediate shipping.
Order code TRIFG60
£135.00
Options, if required, will be automatically added to the dish when you "add to cart" below.
If you are outside of the UK, a 20% VAT refund will be done before shipping.
Triax 70cm heavy duty fibre glass dish
(with LNB and hot dipped galanised wall mount options).
Click on any blue link for more information. Use the browser "back" button to return.
Ideal for high wind and high salt areas.
Available in dark grey or cream
This range of heavy duty fibre glass dishes come in two colours and from two manufacturers - Triax (cream and anthracite)
and Cahors (white and dark grey). Sizes are Triax
60cm, Triax
70cm, Cahors 65cm (featured here), Cahors
80cm, and
Cahors
1.0m. 7 different LNB options and hot dipped galvanised wall mount options are also available below.
These are heavy duty high wind load dishes kit ideal for use in high salt "near the coast" locations. Especially ideal for
the high wind and salt areas of the east coast Scotland and Ireland. Clearly the fibre glass dish cannot corrode and the
heavy mount on the back uses a much heavier gauge steel and is hot dipped galvanised. Triax use stainless steel nuts
and bolts. Very high quality dish kits for people who want to solve their satellite dish corrosion problems.
Whilst the pictures show Triax stickers on the dishes, Triax currently do not put stickers on their current range.
Triax DAP610 cream (Triax part number 362610) or Triax DAP611 dark grey (Triax part number 362611) dishes.
Explaining the LNB options - Universal LNBs are used by "world" receivers, freesat non-recordable and Sky HD receivers.
Sky Q™ and Freesat 4K recordable receivers use wideband LNBs. Hybrid LNB with 6 outputs are twin wideband LNBs and a quad
universal LNBs all in the one package. This is ideal if you have different types of receivers in different rooms. To summarise, single,
twin and quad universal LNBs are used with most satellite receivers. Wideband and hybrid LNBs are used with Sky Q™ and freesat
4K recordable. Quatro LNBs are used with multiswitches. Twin wideband LNBs or quatro LNBs can be used with Sky Q™ multiswitches.
Wall mount options - The galvanised "U pole" wall mount is adjustable. The dish can be close to the wall if the wall is
south facing or further away from the wall if a larger stand off distance is required. Alternatively there is a very heavy
duty hot dipped galvanised J mount. Long pole
above the gutter wall mounts are also available sepatately.
A quality brandname Triax 70cm dish with optional LNBs and optional wall mount. Ring us if you need advice. 01207 544664.
Shipping information and options. (
VAT info.) (
Stock levels.)
Choose either "
free mainland UK delivery" - UK shipping
option No 1 or
priority options 4-7.
For "
UK offshore islands including Northern Ireland by courier" dishes up
to 80cm choose the £15 - UK shipping option No 2.
International - Republic of Ireland - dishes up to 80cm - choose the £15 "
fixed price
multiple items to Eire" shipping option.
International - within the EU - dishes up to 80cm - choose the £38 "
1 box up to 20Kg by
courier to EU countries" shipping option.
International - outside of the EU - all dishes/sizes - choose the "
International shipping
quote by e-mail" shipping option.
Triax 70cm heavy duty fibre glass dish.
In stock and ready for immediate shipping.
Order code TRIFG70
£140.00
Options, if required, will be automatically added to the dish when you "add to cart" below.
If you are outside of the UK, a 20% VAT refund will be done before shipping.
Cahors 65cm heavy duty fibre glass dish
Click on any blue link for more information. Use the browser "back" button to return.
Ideal for high wind and high salt areas.
Available in dark grey or white
This range of heavy duty fibre glass dishes come in two colours and from two manufacturers - Triax (cream and anthracite)
and Cahors (white and dark grey). Sizes are Triax
60cm, Triax
70cm, Cahors 65cm (featured here), Cahors
80cm, and
Cahors
1.0m. 7 different LNB options and hot dipped galvanised wall mount options are also available below.
Please note the pictures above show the Cahors 1.0m dish. The 65cm has identical features but smaller.
These are heavy duty high wind load dishes kit ideal for use in high salt "near the coast" locations. Especially ideal for
the high wind and salt areas of the east coast Scotland and Ireland. Clearly the fibre glass dish cannot corrode and the
double clamp heavy mount on the back uses a much heavier gauge steel and is hot dipped galvanised. Very high quality dish
kits for people who want to solve their satellite dish corrosion problems. Whilst the pictures show Cahors stickers on
the dishes, the stickers can be pealed off if required. Cahors 651W white or Cahors 651 dark grey dishes.
Explaining the LNB options - Universal LNBs are used by "world" receivers, freesat non-recordable and Sky HD receivers.
Sky Q™ and Freesat 4K recordable receivers use wideband LNBs. Hybrid LNB with 6 outputs are twin wideband LNBs and a quad
universal LNBs all in the one package. This is ideal if you have different types of receivers in different rooms. To summarise, single,
twin and quad universal LNBs are used with most satellite receivers. Wideband and hybrid LNBs are used with Sky Q™ and freesat
4K recordable. Quatro LNBs are used with multiswitches. Twin wideband LNBs or quatro LNBs can be used with Sky Q™ multiswitches.
Wall mount options - The galvanised "U pole" wall mount is adjustable. The dish can be close to the wall if the wall is
south facing or further away from the wall if a larger stand off distance is required. Alternatively there is a very heavy
duty hot dipped galvanised J mount. Long pole
above the gutter wall mounts are also available sepatately.
A quality brandname Cahors 65cm dish with optional LNBs and optional wall mount. Ring us if you need advice. 01207 544664.
Shipping information and options. (
VAT info.) (
Stock levels.)
Choose either "
free mainland UK delivery" - UK shipping
option No 1 or
priority options 4-7.
For "
UK offshore islands including Northern Ireland by courier" dishes up
to 80cm choose the £15 - UK shipping option No 2.
International - Republic of Ireland - dishes up to 80cm - choose the £15 "
fixed price
multiple items to Eire" shipping option.
International - within the EU - dishes up to 80cm - choose the £38 "
1 box up to 20Kg by
courier to EU countries" shipping option.
International - outside of the EU - all dishes/sizes - choose the "
International shipping
quote by e-mail" shipping option.
Cahors 65cm heavy duty fibre glass dish.
In stock and ready for immediate shipping.
Order code CAHFG65
£125.00
Options, if required, will be automatically added to the dish when you "add to cart" below.
If you are outside of the UK, a 20% VAT refund will be done before shipping.
Cahors 80cm heavy duty fibre glass dish
(with LNB and hot dipped galanised wall mount options).
Click on any blue link for more information. Use the browser "back" button to return.
Ideal for high wind and high salt areas.
Available in dark grey or white
This range of heavy duty fibre glass dishes come in two colours and from two manufacturers - Triax (cream and anthracite)
and Cahors (white and dark grey). Sizes are Triax
60cm, Triax Triax
70cm, Cahors
65cm, Cahors 80cm (featured here), and
Cahors
1.0m. 7 different LNB options and hot dipped galvanised wall mount options are also available below.
Please note the pictures above show the Cahors 1.0m dish. The 80cm has identical features but smaller.
These are heavy duty high wind load dishes kit ideal for use in high salt "near the coast" locations. Especially ideal for
the high wind and salt areas of the east coast Scotland and Ireland. Clearly the fibre glass dish cannot corrode and the
double clamp heavy mount on the back uses a much heavier gauge steel and is hot dipped galvanised. Very high quality dish
kits for people who want to solve their satellite dish corrosion problems. Cahors 801W white or Cahors 801 dark grey dishes.
Whilst the pictures show Cahors stickers on the dishes, the stickers can be pealed off if required.
Explaining the LNB options - Universal LNBs are used by "world" receivers, freesat non-recordable and Sky HD receivers.
Sky Q™ and Freesat 4K recordable receivers use wideband LNBs. Hybrid LNB with 6 outputs are twin wideband LNBs and a quad
universal LNBs all in the one package. This is ideal if you have different types of receivers in different rooms. To summarise, single,
twin and quad universal LNBs are used with most satellite receivers. Wideband and hybrid LNBs are used with Sky Q™ and freesat
4K recordable. Quatro LNBs are used with multiswitches. Twin wideband LNBs or quatro LNBs can be used with Sky Q™ multiswitches.
Wall mount options - The galvanised "U pole" wall mount is adjustable. The dish can be close to the wall if the wall is
south facing or further away from the wall if a larger stand off distance is required. Alternatively there is a very heavy
duty hot dipped galvanised J mount. Long pole
above the gutter wall mounts are also available sepatately.
A quality brandname Cahors 80cm dish with optional LNBs and optional wall mount. Ring us if you need advice. 01207 544664.
Shipping information and options. (
VAT info.) (
Stock levels.)
Choose either "
free mainland UK delivery" - UK shipping
option No 1 or
priority options 4-7.
For "
UK offshore islands including Northern Ireland by courier" dishes up
to 80cm choose the £15 - UK shipping option No 2.
International - Republic of Ireland - dishes up to 80cm - choose the £15 "
fixed price
multiple items to Eire" shipping option.
International - within the EU - dishes up to 80cm - choose the £38 "
1 box up to 20Kg by
courier to EU countries" shipping option.
International - outside of the EU - all dishes/sizes - choose the "
International shipping
quote by e-mail" shipping option.
Cahors 80cm heavy duty fibre glass dish.
In stock and ready for immediate shipping.
Order code CAHFG80
£240.00
Options, if required, will be automatically added to the dish when you "add to cart" below.
If you are outside of the UK, a 20% VAT refund will be done before shipping.
Cahors 1.0m heavy duty fibre glass dish
(with LNB and hot dipped galanised wall mount options).
Click on any blue link for more information. Use the browser "back" button to return.
Ideal for high wind and high salt areas.
Available in dark grey or white
This range of heavy duty fibre glass dishes come in two colours and from two manufacturers - Triax (cream or dark grey)
and Cahors (white and dark grey). Sizes are Triax
60cm, Triax Triax
70cm, Cahors
65cm, Cahors
80cm, and
Cahors 1.0m (featured here). 7 different LNB options and hot dipped galvanised wall mount options are also available below.
These are heavy duty high wind load dishes kit ideal for use in high salt "near the coast" locations. Especially ideal for
the high wind and salt areas of the east coast Scotland and Ireland. Clearly the fibre glass dish cannot corrode and the
double clamp heavy mount on the back uses a much heavier gauge steel and is hot dipped galvanised. Very high quality dish
kits for people who want to solve their satellite dish corrosion problems. Cahors 1001W white or Cahors 1001 dark grey dishes.
Whilst the pictures show Cahors stickers on the dishes, the stickers can be pealed off if required.
Explaining the LNB options - Universal LNBs are used by "world" receivers, freesat non-recordable and Sky HD receivers.
Sky Q™ and Freesat 4K recordable receivers use wideband LNBs. Hybrid LNB with 6 outputs are twin wideband LNBs and a quad
universal LNBs all in the one package. This is ideal if you have different types of receivers in different rooms. To summarise, single,
twin and quad universal LNBs are used with most satellite receivers. Wideband and hybrid LNBs are used with Sky Q™ and freesat
4K recordable. Quatro LNBs are used with multiswitches. Twin wideband LNBs or quatro LNBs can be used with Sky Q™ multiswitches.
Wall mount options - The 480mm stand-off galvanised elbow or the heavy duty 50mm pole 450mm stand-off mount are available.
Long pole
above the gutter low cost wall mounts and very heavy duty above the gutter wall mounts with 2m long, 50mm
diameter poles and
100mm,
300mm,
450mm, and
550mm stand-off distances to clear gutters are available sepatately.
A quality brandname Cahors 1.0mcm dish with optional LNBs and optional wall mounts. Ring us if you need advice. 01207 544664.
Shipping information and options. (
VAT info.) (
Stock levels.)
Choose either "
free mainland UK delivery" - UK shipping
option No 1 or
priority options 4-7.
For "
UK offshore islands including Northern Ireland by courier" choose the
£89.00 shipping option.
International - To all locations choose the "
International shipping quote by e-mail" option.
Cahors 1.0m heavy duty fibre glass dish.
In stock and ready for immediate shipping.
Order code CAHFG100
£295.00
Options, if required, will be automatically added to the dish when you "add to cart" below.
If you are outside of the UK, a 20% VAT refund will be done before shipping.
SelfSat / Sqish antennas.
Please note that these antennas are white straight out of the box.
At last there’s a real flat-plane antenna alternative to the black mesh dish. If you can’t have a normal dish because of
planning permission or they’re in a conservation area or they simply don’t like black mesh or other dishes, the Sqish
has arrived. This new antenna uses advanced folded wave-guide technology to give usable performance in a discreet
white flat package. (Not suitable for northern England or Scotland) Quad LNB included. Wall mount is included.
There are hundreds of vinyl sticker companies who where you can upload a picture of your wall and they can
customize the appearance using the picture supplied. See the brick covered Sqish in the top left hand
picture and how much better it looks than the sky mini dish.
Shipping information and options. (
VAT info.) (
Stock levels.)
Choose either "
free mainland UK delivery" - UK shipping
option No 1 or
priority options 4-7.
For "
UK offshore islands including Northern Ireland by courier" dishes up
to 80cm choose the £15 - UK shipping option No 2.
International - Republic of Ireland - dishes up to 80cm - choose the £15 "
fixed price
multiple items to Eire" shipping option.
International - within the EU - dishes up to 80cm - choose the £38 "
1 box up to 20Kg by
courier to EU countries" shipping option.
International - outside of the EU - all dishes/sizes - choose the "
International shipping
quote by e-mail" shipping option.
Quad LNB SelfSat Sqish antenna. Supplied white.
Order code SELFSAQ
£199.95
Quad LNB SelfSat/Sqish antenna with Triax Sky Q™ interface.
Suitable for use with Sky Q™
(Please note - "Sky Q™" is a trade mark of Sky Television)
Order code SELFSAQI
£299.90
Sqish 3 flat plate antenna
With many LNB options. Wall mount for brick, stone wall and for window frame fixing. Also pole mounting.
Tested in the north of England where the signal is lower than in the south. Ideal for -
Astra 2, Sky or freesat. Also ideal for Astra 1. Probably fine for Hotbird in the south but not the north.
Since this is a flat plate antenna and not a dish, it might not be subject to council permission in sensitive areas.
As with the Sqish 1 (above) vinyl covers of any colour or design can be stuck to the face. Size - 43cm by 43cm
Choosing the correct LNB - For Sky HD, older freesat receivers like "Humax" and freesat 4k non-recordable, the
Manhattan SX freesat receiver or world receivers you need a universal LNB. That would be the quad or octo universal
LNB or it could be one of the 4 "quad" universal outputs from a 6 output hybrid LNB. For Sky Q™ or Freesat 4K
recordable you need a twin wideband LNB or the twin wideband outputs from a 6 output Hybrid LNB The hybrid LNB,
with 2 wideband outputs and 4 universal outputs. It combines a wideband LNB with a quad universal LNB
and so all types of receivers can be used. The Hybrid LNB also lets you connect to Sky Q™ or Freesat 4K recordable
using the twin wideband outputs and other types of receivers in other rooms as well using the quad universal outputs.
Shipping information and options. (
VAT info.) (
Stock levels.)
Choose either "
free mainland UK delivery" - UK shipping
option No 1 or
priority options 4-7.
For "
UK offshore islands including Northern Ireland by courier" dishes up
to 80cm choose the £15 - UK shipping option No 2.
International - Republic of Ireland - dishes up to 80cm - choose the £15 "
fixed price
multiple items to Eire" shipping option.
International - within the EU - dishes up to 80cm - choose the £38 "
1 box up to 20Kg by
courier to EU countries" shipping option.
International - outside of the EU - all dishes/sizes - choose the "
International shipping
quote by e-mail" shipping option.
Sqish 3 flat plate antenna
In stock and ready for immediate shipping.
Order code SQISH3FPA
£129.95
Options, if required, will be automatically added to the dish when you "add to cart" below.
If you are outside of the UK, a 20% VAT refund will be done before shipping.
Channel Master 1.0m heavy duty dish
This is an opportunity to buy something which is not available any more. A reconditioned Channel Master 1.0m
fibre glass dish. The fibre glass dish is "ex-demo" and fitted with a new AZEL mount, new arms and new LNB clamp.
One only. The dish reflector has been painted to recondition it's appearance. Every other part is brand new.
These Channel Master dishes were the heaviest duty dishes available. Originally Channel Master made a 90cm,
1.0m, 1.2m, 1.8m and 2.4m dish. When Raven took over, they only offered 1.2m, 1.8m and 2.4m dishes. Therefore
the 1.0m dish has not been available for some time. It is packaged with brand new Raven (formally Channel Master)
parts. Thermoset-moulded glass fibre reinforced polyester for strength, rigidity and surface accuracy. Collar
fits a 76mm (3.0 inches) pole. (Raven dishes and parts are manufactured by Skyware Global.) These is the
highest quality heaviest duty 1.0m dishes available. The aim of the manufacturer was to produce a dish which
was high gain, capable of high wind loads and has long term durability. We have sold Raven and formally Channel
Master dishes even for use on oil rigs in the North Sea for many years where the wind loads are very high.
Raven AZEL mount included. The AZEL mount uses a collar and fits onto a 76mm or 3-inch pole.
LNB options below. There are many LNB options. LNB not included unless an option is chosen. There are 40mm
clamp universal and quatro LNB options. Quatro LNBs are used with multiswtches. If a wideband LNB is to be used,
it must be 40mm and there are no c120 flange wideband LNBs available. This is also the case with the fibre headend.
Feedhorn c120 LNB options below. A matched feedhorn to maximise signal capture in low signal locations is
available with several c120 flange LNB options.
A multifeed 3 LNB bracket option is also available.
Wall mount and
ground stand options below. A heavy duty Primesat wall mount or ground stand is also available.
Heavy duty
above the gutter wall mounts can be ordered separately with 2m long, 76mm diameter
(3-inch) poles and
100mm,
300mm,
450mm, and
550mm stand-off distances to clear gutters.
Non-pentrating ground stand. A heavy duty Primesat non-penetrating
ground stand is available separately.
C Band LNBs can be selected separately by ordering a C band stainless steel feed
support clamp and a
C Band LNB
A
motorised version of this dish is available and an
inclined orbit motorised version of this dish is also available.
Shipping information and options. (
VAT info.) (
Stock levels.)
Choose either "
free mainland UK delivery" - UK shipping
option No 1 or
priority options 4-7.
For "
UK offshore islands including Northern Ireland by courier" choose the
£89.00 shipping option.
International - To all locations choose the "
International shipping quote by e-mail" option.
Channel Master Ex Demo. reconditioned 1.0m heavy duty fibre
glass dish with Raven AZEL mount.
Order code RA10AZEL
£295.00
Options, if required, will be automatically added to the dish when you "add to cart" below.
If you are outside of the UK, a 20% VAT refund will be done before shipping.
Raven 1.2m heavy duty fibre glass
dish with Raven AZEL mount.
Raven 1.2m fixed dish with Raven AZEL mount. Raven dishes- formerly "Andrews" and before that "Channel Master".
Technical - Thermoset-moulded glass fibre reinforced polyester for strength, rigidity and surface accuracy. Gain 42.0 dBi
at 11.95Ghz. 3dB beamwidth - 1.6 degrees. Cross polarisation - 30dB. Collar fits a 76mm (3.0 inches) pole. Raven dishes
are manufactured by Skyware Global. These are the highest quality heaviest duty 1.2m dishes available. The aim of the
manufacturer was to produce a dish which was high gain, capable of high wind loads and has long term durability.
This is most likely the best 1.2m dish in the world. Designed for high wind loads.
Raven AZEL mount included. The AZEL mount uses a collar and fits onto a 76mm or 3-inch pole.
LNB options below. There are many LNB options. LNB not included unless an option is chosen. There are 40mm
clamp universal and quatro LNB options. Quatro LNBs are used with multiswtches. If a wideband LNB is to be used,
it must be 40mm and there are no c120 flange wideband LNBs available. This is also the case with the fibre headend.
Feedhorn c120 LNB options below. A matched feedhorn to maximise signal capture in low signal locations is
available with several c120 flange LNB options.
Wall mount and
ground stand options below. A heavy duty Primesat wall mount or ground stand is also available.
Heavy duty
above the gutter wall mounts can be ordered separately with 2m long, 76mm diameter
(3-inch) poles and
100mm,
300mm,
450mm, and
550mm stand-off distances to clear gutters.
Non-pentrating ground stand. A heavy duty Primesat non-penetrating
ground stand is available separately.
C Band LNBs can be selected separately by ordering a C band stainless steel feed
support clamp and a
C Band LNB
A
motorised version of this dish is available and an
inclined orbit motorised version of this dish is also available.
Shipping information and options. (
VAT info.) (
Stock levels.)
Choose either "
free mainland UK delivery" - UK shipping
option No 1 or
priority options 4-7.
For "
UK offshore islands including Northern Ireland by courier" choose the
£89.00 shipping option.
International - To all locations choose the "
International shipping quote by e-mail" option.
Raven 1.2m heavy duty fibre glass dish with Raven AZEL mount.
Order code RA12AZEL
£510.00
Options, if required, will be automatically added to the dish when you "add to cart" below.
If you are outside of the UK, a 20% VAT refund will be done before shipping.
Raven 1.2m dish options. Click on picture for more Info.
Adjustable feet for motorised use.
This is a worthwhile addition when ordering a 76mm (3-inch) ground stand. Feet are not included as
standard with the stand above. Using the 1.8m stand above, for motorised use, to make the pole plumb, we would
recommend at 6 feet
Manufactured by the Satellite Superstore. An exclusive high quality product.
Adjustable feet for motorised use.
Our own "Primesat Vision" heavy duty range. Manufactured since 1991.
Adjustable feet option when you buy a 1.8m Primesat dish. To buy these feet separately go to the
Ground Stands page.
Click here to order
Primesat 7680 Shim (spacer).
This shim is designed to convert a 76mm pole to 80mm.
Example of use - the
Primesat motor unit
for the motorised Raven (formally "Andrews" and before that "Channel Master")
1.8m dish is designed for an 80mm pole but will fit on a 76mm pole. It is, however a better fit if the 76mm to 80mm
Primesat shim is used. 80mm poles are not a standard size in the UK and so this shim was developed to make a perfect
fit between the Primesat motor unit and a 76mm (3inch) pole.
2nd Example - the
Primesat motor unit for the
motorised Raven (formally "Andrews" and before that "Channel Master")
1.2m dish is designed for an 80mm pole but will fit on a 76mm pole. It is, however a better fit if the 76mm to 80mm
Primesat shim is used. 80mm poles are not a standard size in the UK and so this shim was developed to make a perfect
fit between the Primesat motor unit and a 76mm (3inch) pole.
Note - we have manufactured ground stands, wall mounts and adapters for satellite dishes including
the Raven / Channel Master 1.8m dish since 1991.
Click here to order.
Raven Spare Parts -
Primesat arms / legs for Raven 1.2m dish.
Fits - Raven - Skyware - formerly - Andrews or Channel Master dishes.
We used to sell original Raven arms, however, whilst sourcing Raven dishes is not a problem, the factory will no longer
supply Raven arms. We have therefore manufactured our own arms for the Raven dishes using stainless steel.
These new very high quality arms include a new stainless steel feed support boss (LNB bracket). The arms are
adjustable and so we supply details on how to set them up to be the same length as the original arms and how
to "fine tune" the focal length. Included are the 3 arms and the 40mm LNB feed support clamp. All metalwork
is 100% stainless steel. If you are using a
Raven feedhorn, the feedhorn comes with 23mm to 40mm spacers.
Shipping options.
UK -
Free mainland UK delivery, (
VAT info.) (
Stock levels.)
so choose "
Free mainland UK delivery" - UK shipping option No 1 (or
priority options 4-7).
For "
UK offshore islands including Northern Ireland" many items including dishes up to 1.0m choose the £15 - UK option No 2.
International - Republic of Ireland - choose the £15 "
fixed price
multiple items to Eire" shipping option
International - Due to the length of these arms please
contact us for a quote.
Please note, although not guaranteed, many 1-3 day standard UK deliveries are actually arriving next day if the order
is received before our cut-off times but there is also a next day priority delivery option at only £6.50 if required
Primesat arms / legs for Raven 1.2m dish including feed support boss.
Order code PRIARM2
£189.95
Raven AZEL mount for Raven 1.2m dish.
Order code RAZEL12
£99.95
Raven feed support boss.
This is the feed support clamp that fits on the ends of 3 arms of the Raven
(formally Andrews and before that Channel Master) 90cm, 1.0m, 1.2m 1.8m and 2.4m offset dishes.
This is a 40mm clamping LNB support boss. Bolts nuts and washers are included.
In stock and ready for immediate shipping.
Raven feedhorn support boss assembly
In stock and ready for immediate shipping
Click here to order.
C Band Feed Support Boss for Raven Dish.
Designed for the
Raven fibre glass offset dishes, 0.9m, 1.0m,
1.2m, 1.8m and
2.4m
Note, Raven dishes were formerly "Andrews" and before that "Channel Master".
This is a high quality stainless steel bracket / feed support boss for C Band LNBs with an offset feedhorn. (60mm)
It cames with extra parts so that a Raven Ku band feedhorn or Ku Band LNBF (universal LNB) can also be fitted. (40mm)
At last a very high quality product made from stainless steel for fitting C band LNBs onto the Raven offset dish.
Click here to order.
Raven 1.8m fixed dish with
Primesat Platinum LNB and AZEL mount.
Raven dishes - formerly "Andrews" and before that "Channel Master". Manufactured by Skyware Global. Very high gain one
piece proven design. Gain is a massive 45.5 dBi (Ku band). Beam width 1.0 degrees, Noise Temp. 31K Cross polarisation
30dB. The one piece reflector is thermoset-molded glass fibre reinforced polyester for strength and rigidity and
surface accuracy. Heavy Duty hot dipped mount. Galvanized feed support legs. When you compare prices please
note that our price INCLUDES the fixed AZEL mount for the back of the dish face to attach the dish to the pole
This is most likely the best 1.8m dish in the world. Designed for high wind loads.
Raven AZEL mount included. The AZEL mount uses a collar and fits onto a 115mm or 4.5-inch pole.
LNB options below. There are many LNB options. LNB not included unless an option is chosen. There are 40mm
clamp universal and quatro LNB options. Quatro LNBs are used with multiswtches. If a wideband LNB is to be used,
it must be 40mm and there are no c120 flange wideband LNBs available. This is also the case with the fibre headend.
Feedhorn c120 LNB options below. A matched feedhorn to maximise signal capture in low signal locations is
available with several c120 flange LNB options.
Ground stand option below. A heavy duty Primesat ground stand option is available.
Non-pentrating ground stand. A heavy duty Primesat non-penetrating
ground stand is available separately.
Wall mount. A heavy duty Primesat
wall mount is available separately.
C Band LNBs can be selected separately by ordering a C band stainless steel feed
support clamp and a
C Band LNB
A
motorised version of this dish is available and an
inclined orbit motorised version of this dish is also available.
Shipping information and options. (
VAT info.) (
Stock levels.)
Choose "
free* mainland UK delivery" - UK shipping
option No 1 (see exception below*)
* Free mainland delivery to most postcodes but some postcodes, highlands and remote locations may require a surcharge
All UK offshore islands. Shipping will carry an additional surcharge.
Email or
ring 01207 544664.
All internationals. Shipping to all destinations is by quotation.
Email or
ring +44 1231 544664 (GMT).
Raven 1.8m heavy duty fibre glass dish with Raven AZEL mount.
Order code RA18AZEL
£1359.95
Options, if required, will be automatically added to the dish when you "add to cart" below.
If you are outside of the UK, a 20% VAT refund will be done before shipping.
Raven 1.8m motorised dish options. Click on picture for more Info.
Raven Spare Parts.
Special offer. Raven AZEL mount for Raven 1.8m dish. While stocks last.
Order code 180AZEL
£399.95
Temprarily out of stock
Primesat arms / legs for Raven 1.8m dish.
Fits - Raven - Skyware - formerly - Andrews or Channel Master dishes.
We used to sell original Raven arms, however, whilst sourcing Raven dishes is not a problem, the factory will no longer
supply Raven arms. We have therefore manufactured our own arms for the Raven dishes using stainless steel.
These new very high quality arms include a new stainless steel feed support boss (LNB bracket). The arms are
adjustable and so we supply details on how to set them up to be the same length as the original arms and how
to "fine tune" the focal length. Included are the 3 arms and the 40mm LNB feed support clamp. Everything is
100% stainless steel. If you are using a
Raven feedhorn, the feedhorn comes with 23mm to 40mm spacers.
Shipping options.
UK -
Free mainland UK delivery, (
VAT info.) (
Stock levels.)
so choose "
Free mainland UK delivery" - UK shipping option No 1 (or
priority options 4-7).
For "
UK offshore islands including Northern Ireland" many items including dishes up to 1.0m choose the £15 - UK option No 2.
International - Republic of Ireland - choose the £15 "
fixed price
multiple items to Eire" shipping option
International - within the EU - choose the £38 "
up to 5Kg by courier to EU countries" shipping option
International - outside of the EU - choose the "
International shipping quote by e-mail" shipping option.
Please note, although not guaranteed, many 1-3 day standard UK deliveries are actually arriving next day if the order
is received before our cut-off times but there is also a next day priority delivery option at only £6.50 if required
Primesat arms / legs for Raven 1.8m dish including feed support boss.
Order code PRIARMS
£219.95
Raven feed support boss.
This is the feed support clamp that fits on the ends of 3 arms of the Raven
(formally Andrews and before that Channel Master) 90cm, 1.0m, 1.2m 1.8m and 2.4m offset dishes.
This is a 40mm clamping LNB support boss. Bolts nuts and washers are included.
In stock and ready for immediate shipping.
Raven feedhorn support boss assembly
In stock and ready for immediate shipping
Click here to order.
C Band Feed Support Boss for Raven Dish.
Designed for the
Raven fibre glass offset dishes, 0.9m, 1.0m,
1.2m, 1.8m and
2.4m
Note, Raven dishes were formerly "Andrews" and before that "Channel Master".
This is a high quality stainless steel bracket / feed support boss for C Band LNBs with an offset feedhorn. (60mm)
It comes with extra parts so that a Raven Ku band feedhorn or Ku Band LNBF (universal LNB) can also be fitted. (40mm)
At last a very high quality product made from stainless steel for fitting C band LNBs onto the Raven offset dish.
Click here to order.
Raven 2.4m fixed dish with Raven
feedhorn & C120 Inverto Black Pro LNB
Raven dishes - formerly "Andrews" and before that "Channel Master". Manufactured by Skyware Global.
The two piece reflector is thermoset-molded glass fiber reinforced polyester for strength and rigidity and surface accuracy.
Heavy Duty galvanized mount. Galvanized feed support legs. Very high gain two piece proven design. Gain is a massive 47.6 dBi
(Ku band). Beam width 0.7 degrees, Noise Temp. 31K Cross polarisation 30dB. A Raven feedhorn and c120 flange LNB is an option.
We manufacture a 168mm (6.5 inch) diameter, 1.6m high
ground stand for this dish. Also check out the
LNB options below if you need to change the LNB to a twin, quad or quatro LNB. There is also a fibre option.
Note - a
motorised version of this dish is also available. A C Band LNB
support boss / bracket. is also available.
LNB options below. There are many LNB options. LNB not included unless an option is chosen. There are 40mm
clamp universal and quatro LNB options. Quatro LNBs are used with multiswtches. If a wideband LNB is to be used,
it must be 40mm and there are no c120 flange wideband LNBs available. This is also the case with the fibre headend.
Feedhorn c120 LNB options below. A matched feedhorn to maximise signal capture in low signal locations is available
with several c120 flange LNB options. We do many
spare parts for this dish. Some are below and above.
Shipping information and options. (
VAT info.) (
Stock levels.)
Choose "
free* mainland UK delivery" - UK shipping
option No 1 (see exception below*)
* Free mainland delivery to most postcodes but some postcodes, highlands and remote locations may require a surcharge
All UK offshore islands. Shipping will carry an additional surcharge.
Email or
ring 01207 544664.
All internationals. Shipping to all destinations is by quotation.
Email or
ring +44 1231 544664 (GMT).
Raven 2.4m heavy duty fibre glass dish with Raven AZEL mount.
Order code RA24AZEL
£3219.95
Options, if required, will be automatically added to the dish when you "add to cart" below.
If you are outside of the UK, a 20% VAT refund will be done before shipping.
Raven 2.4m motorised dish options. Click on picture for more Info.
Raven Spare Parts -
arms / legs for Raven 2.4m dish.
These arms are included when you buy the Raven dish but if you have an old Channel Master (or Andrews)
dish for many years dish and the arms need replacing they are available separately here.
These are the 3 arms which go between the dish reflector and the LNB feed support clamp.
Please note the picture shows the arms for the 1.8m dish but the 2.4m arms are longer but similar.
The
Raven feed support clamp is also available.
Click here to order it as well.
Shipping options.
UK -
Free mainland UK delivery, (
VAT info.) (
Stock levels.)
so choose "
Free mainland UK delivery" - UK shipping option No 1 (or
priority options 4-7).
For "
UK offshore islands including Northern Ireland" many items including dishes up to 1.0m choose the £15 - UK option No 2.
International - Republic of Ireland - choose the £15 "
fixed price
multiple items to Eire" shipping option
International - Due to the length of these arms please
contact us for a quote.
Please note, although not guaranteed, many 1-3 day standard UK deliveries are actually arriving next day if the order
is received before our cut-off times but there is also a next day priority delivery option at only £6.50 if required
Spare arms / legs for Raven 2.4m dish.
Order code RAVARM24
£229.95
Special enthusiast arms/legs/platform
to support the "Viking" motorised feed
for the Raven 2.4m dish.
Viking motorised feedhorn not included.
These arms are designed for the Raven dish but also fit a Channel Master or Andrews dish which is the same.
The arms and platform are to support the "Viking motorised feedhorn" which is not included. See
example.
This feedhorn allows the enthusiast to fine tune the "skew" using a special positioner, to improve reception.
Free rain cover included. This is a special order and is built for you. Better pictures will follow shortly.
Shipping options.
UK -
Free mainland UK delivery, (
VAT info.) (
Stock levels.)
so choose "
Free mainland UK delivery" - UK shipping option No 1 (or
priority options 4-7).
For "
UK offshore islands including Northern Ireland" many items including dishes up to 1.0m choose the £15 - UK option No 2.
International - Republic of Ireland - choose the £15 "
fixed price
multiple items to Eire" shipping option
International - Due to the length of these arms please
contact us for a quote.
Special enthusiast arms/legs/platform to support the
"Viking" motorised feed for the Raven 2.4m dish.
Order code RAARM24V
£549.95
Raven feed support boss.
This is the feed support clamp that fits on the ends of 3 arms of the Raven
(formally Andrews and before that Channel Master) 90cm, 1.0m, 1.2m 1.8m and 2.4m offset dishes.
This is a 40mm clamping LNB support boss. Bolts nuts and washers are included.
In stock and ready for immediate shipping.
Raven feedhorn support boss assembly
In stock and ready for immediate shipping
Click here to order.
C Band Feed Support Boss for Raven Dish.
Designed for the
Raven fibre glass offset dishes, 0.9m, 1.0m,
1.2m, 1.8m and
2.4m
Note, Raven dishes were formerly "Andrews" and before that "Channel Master".
This is a high quality stainless steel bracket / feed support boss for C Band LNBs with an offset feedhorn. (60mm)
It cames with extra parts so that a Raven Ku band feedhorn or Ku Band LNBF (universal LNB) can also be fitted. (40mm)
At last a very high quality product made from stainless steel for fitting C band LNBs onto the Raven offset dish.
Click here to order.
Special offer for 2.4m Raven dish -
AZEL mount for Raven 2.4m dish.
Special offer.
Heavy duty Raven AZEL mount. Designed to fit a 6.5 inch pole.
Please note the bolts to bolt the mount onto the dish refector (hardware kit) are not included but can be ordered separately.
Also note this mount is for the "TV receive only" dish. The TVRO dish is shown in the right hand picture. Dish not included.
This kit is ideal if you have an old Raven / Andrews / Channel Master 2.4m dish
and the mount is worn or rusty.
Shipping options.
UK -
Free mainland UK delivery, (
VAT info.) (
Stock levels.)
so choose "
Free mainland UK delivery" - UK shipping option No 1 (or
priority options 4-7).
For "
UK offshore islands including Northern Ireland" many items including dishes up to 1.0m choose the £15 - UK option No 2.
International - Republic of Ireland - choose the £15 "
fixed price
multiple items to Eire" shipping option
International - all destinations - choose the "
International shipping quote by e-mail"
shipping option.
Please note, although not guaranteed, many 1-3 day standard UK deliveries are actually arriving next day if the order
is received before our cut-off times but there is also a next day priority delivery option at only £6.50 if required
Special offer - AZEL mount for raven 2.4m dish. Excludes bolts.
Discounted. Only 2 mounts available at this price. Please note, excludes bolts between mount and reflector.
Order code RAZEL24
£449.95
