Suitable for Triax TD 54, 64cm, 80cm, 90cm and 85cm transparent dishes if facing south. Ideal if the wall
is south facing and the dish needs a minimum stand off distance of 150mm. Do not use this wall mount if
the dish has to poiint up or down the street as more stand off distance would be needed.
Material - Aluminium. Construction. Welded Aluminium. Very high quality aluminium welds.
Stand off distance 150mm to inside of pole. Pole diameter 48mm
This wall mount not suitable for Raven (formall Andrews and before that Channel Master) dishes as they need a 76mm (3-inch) pole.
This wall mount is not suitable for the Primesat transparent 60cm dish. (Clamps will not fit). Use wall mount
Add a Primesat 1.1m aluminium dish.
Low cost, high quality, high gain.
New product. Coming soon. First stocks - 20th November.
Optional 0.1dB LNB and
Smart Titanium LNB and optional Primesat 430mm wall mount (or see
option).
This
aluminium dish has a total weight of only 7.5Kg. (A steel 1.1m weighs 11Kg.) The
gain is a massive 41.2dB at
12.75GHhz and the coating is Polyester RAL7035
powder coating. It is available in light grey or very dark grey (almost black).
The
easy adjust AZEL mount on the back of the dish (where elevation is adjusted) is
galvanised. It will clamp to poles
from 35mm to 60mm diameter.
Smart Titanium LNB from "Smart Electronic GmbH" in Germany. Smart also make
professional meters and
diseqc switches. This is the new Titanium third edition LNB that is widely praised on many
web sites. It has the gold connections and is very low noise. An ultimate performance LNB. Ideal for situations where
the maximum dish size cannot be increased. This LNB has a high output and so it is also very good for long cable runs,
e.g. longer than 35m. In the comparative LNB test in April 08 What Satellite magazine, the second edition (0.2dB) LNB
performed best of all. This Titanium 0.1dB third edition LNB improves on the previous model. This 1.1m dish is ideal for
many satellites when used in the UK. Extensive testing shows this dish to work very well for the Sky or freesat channels
from Astra 2 when used by customers in the south of France where signal levels are weak.
It is possible to upgrade the single LNB to a twin, quad, octo or quatro LNB
using the LNB upgrade options
These upgrade options only apply if you are ordering a dish with a single LNB (you pay the difference in price - or less) They do
not apply if you are ordering a dish without an LNB. 1m and 2m pole "
above the gutter" wall mounts are available.
Shipping information.
Please note that due to the large size (volume) of the 1.1m dish there are extra (top up) delivery charges for "out of area UK postcodes".
Most UK postcodes have no extra charges. Areas like the Scottish highlands are not covered. Therefore delivery
is included to
selected mainland UK postcodes. There is a £15.00 delivery charge to offshore islands including Northern
Ireland to
selected postcodes. If your postcode is not on the list, this may be because it is "outside of main city areas" and
so
click on the link here to see if your post code is covered. If your postcode is on the list, delivery charges are in "included to
mainland destinations" (but remember to select the £15 option for offshore islands). Postcodes are provided by "Parcelforce".
If your postcode is not on the list, you will need a shipping quotation. If you place an order, the shipping quote will be emailed
to you. You can then either accept the quote and pay at the link provided, or decline the quote and your order will be refunded, or,
you may prefer to email us for a quote on the
contact page. If your postcode is on the list please also note that next day
delivery is not available. This is a 48 hour "large item delivery service". Most UK postcodes are on the list.
Shipping options. Discounted shipping on all internet orders.
(
VAT info.) (
Stock levels.)
UK -
mainland UK delivery (selected postcodes only) is included in the price,
so choose "
UK mainland delivery included" - UK shipping option No 1.
Click here for
selected postcodes.
For "UK offshore islands including Northern Ireland by courier" to
selected postcodes choose the £15 - UK shipping option No 2.
For
all other UK destinations - choose shipping option 1. A shipping quotation will be emailed to you for a top up payment.
International - within the EU - 1.1m and 1.2m dishes - choose the £69 "
Oversized item to an EU destination"
shipping option
International - outside of the EU - all dishes/sizes - choose the "
International shipping quote by e-mail" shipping
option.
Add a Triax 90cm dish, 20 degree Triax multibracket
2 Titanium single LNBs, 2 way switch and wall mount.
The 90cm provides more signal for combinations like 23.5E and 13E, 16E and 28E etc.
A
standard wall mount is included. If an
above the gutter long pole wall mount is required
instead of a standard mount, You can
deduct the wall mount from your dish kit.
Order code AD882SA
Add only £114.95
Remove wall mount from dish kit.
Order code DEDUCT
Deduct £10.00
Add an 80cm, 90cm, transparent 85cm
with 20 degree multibracket for 2 satellites
and a multiswitch with multiple outputs.
two satellite multi-LNB kit
This kit is for multiple receivers.
The Primesat 9 in 8 out mutiswitch allows up to 2 quatro LNBs on up to 2 satellites to be accessed on up to 8 satellite receivers
(or 4 twin tuner units) One of the inputs is an aerial input and 8 inputs are for the 2 quatro LNBs. Other professional Primesat
multiswitches are available Including 9 in and 16 out and 13 in (for 3 satellites) and 17 (for 4 satellites) for more information
see the
multiswitch satellite page. Triax 80cm or 90cm dish with 2 quatro LNBs, Triax perfect fit rigid
multi bracket, Primesat
9 in and 8 out multiswitch, optional wall mount, instructions. Unlike flexible difficult to set up, universal fit brackets, this is
a dream to use as it is well engineered and designed by Triax for their own TD dishes. The Triax 80cm and the Primesat clear 85cm
dishes are ideal for Astra 2 at 28E and Hotbird at 13E or Astra 1 at 19E. The 90cm option could be used for 28E and 19E, 13E and 28E,
23.5E and 28E, 23.5E and 13E, 28E and 16E etc. Indeed it could also be used for many combinations of satellites. Every receiver can
access any channel on any satellite. The kit comes with our own specially prepared dish/LNB setting up instructions. As usual
manufacturers instructions are poor and best ignored. Use ours as we have worked out all the shortcuts. A version of this kit is
available with 16 outputs. These are the new
Titanium third edition LNB from Smart Electronic in Germany. They are
widely
praised on many web sites and have an excellent reputation. they have the gold connections and are very low noise. Ultimate
performance LNBs. In the May 08 issue of "What Satellite" magazine the 2nd edition Titanium LNB won the group test. This is
the new third edition which is even better. You can upgrade the multiswitch from 8 outputs to
12 outputs or
16 outputs.
Shipping options. Discounted shipping on all web orders.
UK -
mainland UK delivery is included in the price, (
VAT info.) (
Stock levels.)
so choose "
Mainland UK delivery included" - UK shipping option No 1 (or
priority options 4-7).
For "
UK offshore islands including Northern Ireland by courier" systems up to 1.0m choose the £15 - UK shipping option No 2.
International - Republic of Ireland - systems up to 1.0m - choose the £15 "
fixed price multiple items to Eire" shipping option
International - within the EU - systems up to 1.0m - choose the £59 "
2 boxes up to 40Kg by courier to EU countries" shipping option
International - within the EU - systems up to 1.0m - choose the £69 "
3 boxes up to 60Kg by courier to EU countries" shipping option
International - outside of the EU - all dishes/sizes - choose the "
International shipping quote by e-mail" shipping option.
Remove wall mount from dish kit.
Order code DEDUCT
Deduct £10.00
Upgrade Primesat 9X8 multiswitch to Primesat 9X12 multiswitch.
Order code 9X89X12
Add £17.45
Upgrade Primesat 9X8 multiswitch to Primesat 9X16 multiswitch.
Order code 9X89X16
Add £39.95
3 and 4 satellite dish Inverto
multiconnect kits
Inverto MultiConnect 3 sat system kit with 3 LNBs,
Triax 80cm or 90cm dish with wall mount option.
Fits all standard dishes. Clamps into the 40mm LNB clamp
e.g. 28E (Astra 2), 19E (Astra 1), 16E or 13E (Hotbird) on one fixed dish (or other combinations.)
Very high quality products. 24 degree look angle. Even the LNBs have been specially
designed for this bracket and have very narrow feedhorns. The LNB neck is only 23mm and the feedhorn cap
is only a fraction larger. It is easy to achieve 3 degrees of separation. 23mm to 40mm spacers are included
so that the centre LNB can attach to a standard 40mm LNB boss on the end of the main feed support arm.
Unlike other systems one LNB can be at the centre of the boom arm to maximise signal on a weak satellite.
Universal dish interface. LNBs designed for a 3 degree separation or larger.
The Diseqc switches cleverly clip onto the main bracket. The leads are all factory made-up and included
to join all parts of the system together. Everything is supplied in quality presentation cases.
This is very impressive kit. 3 LNBs are included.
This kit includes TWO Diseqc switches and so if THREE twin LNB upgrades are added below,
two receivers or a twin tuner receiver can be connected. They will see all 3 sats.
Please note that the Triax steel dish is black.
Options - for twin tuner receivers,
This kit includes TWO 4-way Diseqc switches and connecting cables. It is "twin LNB ready". If THREE twin LNB
upgrades are added below, a twin tuner receiver (or two single tuner receivers can be connected. They will see
all 3 satellites. If this is required see the
Twin LNB options below. The twin LNB option must then be added 3 times.
Also see the
Quad LNB and
Quatro LNB options below. One quad LNB may be needed
if extra outputs are needed for additional receivers looking at Sky or Freesat in the 28E position.
Also check out the
quatro LNB multiswitch options below if required.
Shipping options. Discounted shipping on all web orders.
UK -
mainland UK delivery is included in the price, (
VAT info.) (
Stock levels.)
so choose "
Mainland UK delivery included" - UK shipping option No 1 (or
priority options 4-7).
For "
UK offshore islands including Northern Ireland by courier" dishes up to 1.0m choose the £15 - UK shipping option No 2.
International - Republic of Ireland - dishes up to 1.0m - choose the £15 "
fixed price multiple items to Eire" shipping option
International - within the EU - dishes up to 1.0m - choose the £38 "
1 box up to 20Kg by courier to EU countries" shipping option
International - outside of the EU - all dishes/sizes - choose the "
International shipping quote by e-mail" shipping option.
Remove wall mount from dish kit.
Order code DEDUCT
Deduct £10.00
Inverto MultiConnect 3 sat system kit with 3 LNBs,
Primesat transparent 85cm dish with wall mount option.
Fits all standard dishes. Clamps into the 40mm LNB clamp
e.g. 28E (Astra 2), 19E (Astra 1), 16E and 13E (Hotbird) on one fixed dish (or other combinations.)
Very high quality products. 24 degree look angle. Even the LNBs have been specially
designed for this bracket and have very narrow feedhorns. The LNB neck is only 23mm and the feedhorn cap
is only a fraction larger. It is easy to achieve 3 degrees of separation. 23mm to 40mm spacers are included
so that the centre LNB can attach to a standard 40mm LNB boss on the end of the main feed support arm.
Unlike other systems one LNB can be at the centre of the boom arm to maximise signal on a weak satellite.
Universal dish interface. LNBs designed for a 3 degree separation or larger.
The Diseqc switches cleverly clip onto the main bracket. The leads are all factory made-up and included
to join all parts of the system together. Everything is supplied in quality presentation cases.
This is very impressive kit. 3 LNBs are included.
Options - for twin tuner receivers,
This kit includes TWO 4-way Diseqc switches and connecting cables. It is "twin LNB ready". If THREE twin LNB
upgrades are added below, a twin tuner receiver (or two single tuner receivers can be connected. They will see
all 3 satellites. If this is required see the
Twin LNB options below. The twin LNB option must then be added 3 times.
Also see the
Quad LNB and
Quatro LNB options below. One quad LNB may be needed
if extra outputs are needed for additional receivers looking at Sky or Freesat in the 28E position.
Also check out the
quatro LNB multiswitch options below if required.
Shipping options. Discounted shipping on all web orders.
UK -
mainland UK delivery is included in the price, (
VAT info.) (
Stock levels.)
so choose "
Mainland UK delivery included" - UK shipping option No 1 (or
priority options 4-7).
For "
UK offshore islands including Northern Ireland by courier" dishes up to 1.0m choose the £15 - UK shipping option No 2.
International - Republic of Ireland - dishes up to 1.0m - choose the £15 "
fixed price multiple items to Eire" shipping option
International - within the EU - dishes up to 1.0m - choose the £38 "
1 box up to 20Kg by courier to EU countries" shipping option
International - outside of the EU - all dishes/sizes - choose the "
International shipping quote by e-mail" shipping option.
Remove wall mount from dish kit.
Order code DEDUCT
Deduct £10.00
Inverto MultiConnect 4 sat system kit with 4 LNBs, Triax
90cm dish with wall mount option.
Fits all standard dishes. Clamps into the 40mm LNB clamp
e.g. 28E (Astra 2), 19E (Astra 1), 16E and 13E (Hotbird) on one fixed dish (or other combinations.)
Very high quality products. 24 degree look angle. Even the LNBs have been specially
designed for this bracket and have very narrow feedhorns. The LNB neck is only 23mm and the feedhorn cap
is only a fraction larger. It is easy to achieve 3 degrees of separation. 23mm to 40mm spacers are included
so that the centre LNB can attach to a standard 40mm LNB boss on the end of the main feed support arm.
Unlike other systems one LNB can be at the centre of the boom arm to maximise signal on a weak satellite.
Universal dish interface. LNBs designed for a 3 degree separation or larger.
The Diseqc switches cleverly clip onto the main bracket. The leads are all factory made-up and included
to join all parts of the system together. Everything is supplied in quality presentation cases.
This is very impressive kit. 3 LNBs are included.
This kit includes TWO Diseqc switches and so if FOUR twin LNB upgrades are added below,
two receivers or a twin tuner receiver can be connected. They will see all 4 sats.
Please note that the Triax dish is black.
Options - for twin tuner receivers,
This kit includes TWO 4-way Diseqc switches and connecting cables. It is "twin LNB ready". If THREE twin LNB
upgrades are added below, a twin tuner receiver (or two single tuner receivers can be connected. They will see
all 3 satellites. If this is required see the
Twin LNB options below. The twin LNB option must then be added 3 times.
Also see the
Quad LNB and
Quatro LNB options below. One quad LNB may be needed
if extra outputs are needed for additional receivers looking at Sky or Freesat in the 28E position.
Also check out the
quatro LNB multiswitch options below if required.
Shipping options. Discounted shipping on all web orders.
UK -
mainland UK delivery is included in the price, (
VAT info.) (
Stock levels.)
so choose "
Mainland UK delivery included" - UK shipping option No 1 (or
priority options 4-7).
For "
UK offshore islands including Northern Ireland by courier" dishes up to 1.0m choose the £15 - UK shipping option No 2.
International - Republic of Ireland - dishes up to 1.0m - choose the £15 "
fixed price multiple items to Eire" shipping option
International - within the EU - dishes up to 1.0m - choose the £38 "
1 box up to 20Kg by courier to EU countries" shipping option
International - outside of the EU - all dishes/sizes - choose the "
International shipping quote by e-mail" shipping option.
Remove wall mount from dish kit.
Order code DEDUCT
Deduct £10.00
Inverto MultiConnect 3 or 4 sat system kit with LNBs, Triax
90cm heavy duty fibre glass dish and wall mount option.
Fits all standard dishes. Clamps into the 40mm LNB clamp
e.g. 28E (Astra 2), 19E (Astra 1), 16E and / or 13E (Hotbird) on one fixed dish (or other combinations.)
Very high quality products. 24 degree look angle. Even the LNBs have been specially
designed for this bracket and have very narrow feedhorns. The LNB neck is only 23mm and the feedhorn cap
is only a fraction larger. It is easy to achieve 3 degrees of separation. 23mm to 40mm spacers are included
so that the centre LNB can attach to a standard 40mm LNB boss on the end of the main feed support arm.
Unlike other systems one LNB can be at the centre of the boom arm to maximise signal on a weak satellite.
Universal dish interface. LNBs designed for a 3 degree separation or larger.
The Diseqc switches cleverly clip onto the main bracket. The leads are all factory made-up and included
to join all parts of the system together. Everything is supplied in quality presentation cases.
This is very impressive kit. 3 LNBs are included.
This kit includes TWO Diseqc switches and so if FOUR twin LNB upgrades are added below,
two receivers or a twin tuner receiver can be connected. They will see all 4 sats.
Options. Choose a black or a cream dish. (The dish in the picture is the black version)
Options - for twin tuner receivers,
This kit includes TWO 4-way Diseqc switches and connecting cables. It is "twin LNB ready". If THREE twin LNB
upgrades are added below, a twin tuner receiver (or two single tuner receivers can be connected. They will see
all 3 satellites. If this is required see the
Twin LNB options below. The twin LNB option must then be added 3 times.
Also see the
Quad LNB and
Quatro LNB options below. One quad LNB may be needed
if extra outputs are needed for additional receivers looking at Sky or Freesat in the 28E position.
Also check out the
quatro LNB multiswitch options below if required.
Shipping options. Discounted shipping on all web orders.
UK -
mainland UK delivery is included in the price, (
VAT info.) (
Stock levels.)
so choose "
Mainland UK delivery included" - UK shipping option No 1 (or
priority options 4-7).
For "
UK offshore islands including Northern Ireland by courier" dishes up to 1.0m choose the £15 - UK shipping option No 2.
International - Republic of Ireland - dishes up to 1.0m - choose the £15 "
fixed price multiple items to Eire" shipping option
International - within the EU - dishes up to 1.0m - choose the £38 "
1 box up to 20Kg by courier to EU countries" shipping option
International - outside of the EU - all dishes/sizes - choose the "
International shipping quote by e-mail" shipping option.
Cream 90cm dish -
Order Code ADI90FW3
Add only £239.95
Cream 90cm dish -
Order Code ADHT904W
Add only £249.95
Remove wall mount from dish kit.
Order code DEDUCT
Deduct £10.00
Inverto MultiConnect 4 sat system kit with 4 LNBs, Technomate
97cm dish with wall mount option.
Fits all standard dishes. Clamps into the 40mm LNB clamp
e.g. 28E (Astra 2), 19E (Astra 1), 16E and 13E (Hotbird) on one fixed dish (or other combinations.)
Very high quality products. 24 degree look angle. Even the LNBs have been specially
designed for this bracket and have very narrow feedhorns. The LNB neck is only 23mm and the feedhorn cap
is only a fraction larger. It is easy to achieve 3 degrees of separation. 23mm to 40mm spacers are included
so that the centre LNB can attach to a standard 40mm LNB boss on the end of the main feed support arm.
Unlike other systems one LNB can be at the centre of the boom arm to maximise signal on a weak satellite.
Universal dish interface. LNBs designed for a 3 degree separation or larger.
The Diseqc switches cleverly clip onto the main bracket. The leads are all factory made-up and included
to join all parts of the system together. Everything is supplied in quality presentation cases.
This is very impressive kit. 3 LNBs are included.
Options - for twin tuner receivers,
This kit includes TWO 4-way Diseqc switches and connecting cables. It is "twin LNB ready". If THREE twin LNB
upgrades are added below, a twin tuner receiver (or two single tuner receivers can be connected. They will see
all 3 satellites. If this is required see the
Twin LNB options below. The twin LNB option must then be added 3 times.
Also see the
Quad LNB and
Quatro LNB options below. One quad LNB may be needed
if extra outputs are needed for additional receivers looking at Sky or Freesat in the 28E position.
Also check out the
quatro LNB multiswitch options below if required.
Shipping options. Discounted shipping on all web orders.
UK -
mainland UK delivery is included in the price, (
VAT info.) (
Stock levels.)
so choose "
Mainland UK delivery included" - UK shipping option No 1 (or
priority options 4-7).
For "
UK offshore islands including Northern Ireland by courier" dishes up to 1.0m choose the £15 - UK shipping option No 2.
International - Republic of Ireland - dishes up to 1.0m - choose the £15 "
fixed price multiple items to Eire" shipping option
International - within the EU - dishes up to 1.0m - choose the £38 "
1 box up to 20Kg by courier to EU countries" shipping option
International - outside of the EU - all dishes/sizes - choose the "
International shipping quote by e-mail" shipping option.
Remove wall mount from dish kit.
Order code DEDUCT
Deduct £10.00
Inverto MultiConnect 4 sat system kit with 4 LNBs, Orbital
1.0m aluminium dish with wall mount option.
Fits all standard dishes. Clamps into the 40mm LNB clamp
e.g. 28E (Astra 2), 19E (Astra 1), 16E and 13E (Hotbird) on one fixed dish (or other combinations.)
Very high quality products. 24 degree look angle. Even the LNBs have been specially
designed for this bracket and have very narrow feedhorns. The LNB neck is only 23mm and the feedhorn cap
is only a fraction larger. It is easy to achieve 3 degrees of separation. 23mm to 40mm spacers are included
so that the centre LNB can attach to a standard 40mm LNB boss on the end of the main feed support arm.
Unlike other systems one LNB can be at the centre of the boom arm to maximise signal on a weak satellite.
Universal dish interface. LNBs designed for a 3 degree separation or larger.
The Diseqc switches cleverly clip onto the main bracket. The leads are all factory made-up and included
to join all parts of the system together. Everything is supplied in quality presentation cases.
This is very impressive kit. 3 LNBs are included.
Options - for twin tuner receivers,
This kit includes TWO 4-way Diseqc switches and connecting cables. It is "twin LNB ready". If THREE twin LNB
upgrades are added below, a twin tuner receiver (or two single tuner receivers can be connected. They will see
all 3 satellites. If this is required see the
Twin LNB options below. The twin LNB option must then be added 3 times.
Also see the
Quad LNB and
Quatro LNB options below. One quad LNB may be needed
if extra outputs are needed for additional receivers looking at Sky or Freesat in the 28E position.
Also check out the
quatro LNB multiswitch options below if required.
Shipping options. Discounted shipping on all web orders.
UK -
mainland UK delivery is included in the price, (
VAT info.) (
Stock levels.)
so choose "
Mainland UK delivery included" - UK shipping option No 1 (or
priority options 4-7).
For "
UK offshore islands including Northern Ireland by courier" dishes up to 1.0m choose the £15 - UK shipping option No 2.
International - Republic of Ireland - dishes up to 1.0m - choose the £15 "
fixed price multiple items to Eire" shipping option
International - within the EU - dishes up to 1.0m - choose the £38 "
1 box up to 20Kg by courier to EU countries" shipping option
International - outside of the EU - all dishes/sizes - choose the "
International shipping quote by e-mail" shipping option.
Remove wall mount from dish kit.
Order code DEDUCT
Deduct £10.00
Using multiple output multiswitches.
Inverto MultiConnect 3 sat system kit with 3
quatro LNBs, Triax 80cm dish with 13 input multiswitch,
Alternative dish, LNB and wall mount options.
Fits all standard dishes. Clamps into the 40mm LNB clamp
e.g. 28E (Astra 2), 19E (Astra 1), 16E and 13E (Hotbird) on one fixed dish (or other combinations.)
Very high quality products. 24 degree look angle. Even the LNBs have been specially
designed for this bracket and have very narrow feedhorns. The LNB neck is only 23mm and the feedhorn cap
is only a fraction larger. It is easy to achieve 3 degrees of separation. 23mm to 40mm spacers are included
so that the centre LNB can attach to a standard 40mm LNB boss on the end of the main feed support arm.
Unlike other systems one LNB can be at the centre of the boom arm to maximise signal on a weak satellite.
Universal dish interface. LNBs designed for a 3 degree separation or larger.
A 13 input multiswitch is included. The leads in the picture are all factory made-up and included
to join all parts of the system together. (However, the leads and Diseqc switches in the kit are not needed
in a quatro LNB, multiswitch installation). Everything is supplied in quality presentation cases.
This is very impressive kit. 3 quatro LNBs are included. A black Triax 80cm solid dish or
other dish options are available. This kit permits LNB points to be situated in many
rooms in a house, depending on the size of multiswitch selected.
Diseqc switching receivers can then access any of the 3 satellites from any room
Shipping options. Discounted shipping on all web orders.
UK -
mainland UK delivery is included in the price, (
VAT info.) (
Stock levels.)
so choose "
Mainland UK delivery included" - UK shipping option No 1 (or
priority options 4-7).
For "
UK offshore islands including Northern Ireland by courier" dishes up to 1.0m choose the £15 - UK shipping option No 2.
International - Republic of Ireland - dishes up to 1.0m - choose the £15 "
fixed price multiple items to Eire" shipping option
International - within the EU - dishes up to 1.0m - choose the £38 "
1 box up to 20Kg by courier to EU countries" shipping option
International - outside of the EU - all dishes/sizes - choose the "
International shipping quote by e-mail" shipping option.
Multiconnect, multiswitch dish options
Choose any of the options above but provide a
Primesat transparent 85cm dish instead of the Triax 80cm dish
This is a kit option only. ONLY select this option if you have already chosen a
3 quatro LNB dish kit with a multiswitch above.
Order Code OPT85IM
Add £45.00
OR -
Choose any of the options above but provide a
Triax 90cm dish instead of the Triax 80cm kit
This is a kit option only. ONLY select this option if you have already chosen a
3 quatro LNB dish kit with a multiswitch above.
Order Code OPT8090U
Add £10.00
OR -
Choose any of the options above but provide an
Technomate 97cm instead of the Triax 80cm dish kit
This is a kit option only. ONLY select this option if you have already chosen a
3 quatro LNB dish kit with a multiswitch above.
Order Code OPT8097U
Add £5.00
OR -
Choose any of the options above but provide an
Orbital aluminium 1.0m instead of the Triax 80cm dish kit
This is a kit option only. ONLY select this option if you have already chosen a
3 quatro LNB dish kit with a multiswitch above.
Order Code OPT8010U
Add £55.00
OR -
Choose any of the options above but provide
(for high wind and high salt locations) a Triax 90cm
heavy duty fibre glass dish instead of the Triax 80cm dish kit
This is a kit option only. ONLY select this option if you have already chosen a
3 quatro LNB dish kit with a multiswitch above.
Black 90cm dish -
Order Code OPTTFG9
Add £90.00
Cream 90cm dish -
Order Code OPTTFG9W
Add £90.00
Remove wall mount from dish kit.
Order code DEDUCT
Deduct £10.00
Using multiple output multiswitches.
Inverto MultiConnect 4 sat system kit with 4
quatro LNBs, Triax 90cm dish with 17 input multiswitch,
Alternative dish, LNB and wall mount options.
Fits all standard dishes. Clamps into the 40mm LNB clamp
e.g. 28E (Astra 2), 19E (Astra 1), 16E and 13E (Hotbird) on one fixed dish (or other combinations.)
Very high quality products. 24 degree look angle. Even the LNBs have been specially
designed for this bracket and have very narrow feedhorns. The LNB neck is only 23mm and the feedhorn cap
is only a fraction larger. It is easy to achieve 3 degrees of separation. 23mm to 40mm spacers are included
so that the centre LNB can attach to a standard 40mm LNB boss on the end of the main feed support arm.
Unlike other systems one LNB can be at the centre of the boom arm to maximise signal on a weak satellite.
Universal dish interface. LNBs designed for a 3 degree separation or larger.
A 17 input multiswitch is included. The leads in the picture are all factory made-up and included
to join all parts of the system together. (However, the leads and Diseqc switches in the kit are not needed
in a quatro LNB, multiswitch installation). Everything is supplied in quality presentation cases.
This is very impressive kit. 4 quatro LNBs are included. A black Triax 90cm solid dish or
other dish options are available. This kit permits LNB points to be situated in many
rooms in a house, depending on the size of multiswitch selected.
Diseqc switching receivers can then access any of the 4 satellites from any room
Shipping options. Discounted shipping on all web orders.
UK -
mainland UK delivery is included in the price, (
VAT info.) (
Stock levels.)
so choose "
Mainland UK delivery included" - UK shipping option No 1 (or
priority options 4-7).
For "
UK offshore islands including Northern Ireland by courier" dishes up to 1.0m choose the £15 - UK shipping option No 2.
International - Republic of Ireland - dishes up to 1.0m - choose the £15 "
fixed price multiple items to Eire" shipping option
International - within the EU - dishes up to 1.0m - choose the £38 "
1 box up to 20Kg by courier to EU countries" shipping option
International - outside of the EU - all dishes/sizes - choose the "
International shipping quote by e-mail" shipping option.
Multiconnect, multiswitch dish options
OR -
Choose any of the options above but provide an
Technomate 97cm instead of the Triax 90cm dish kit
This is a kit option only. ONLY select this option if you have already chosen a
4 quatro LNB dish kit with a multiswitch above.
Order Code OPT8097U2
Add £5.00
OR -
Choose any of the options above but provide an
Orbital aluminium 1.0m instead of the Triax 80cm dish kit
This is a kit option only. ONLY select this option if you have already chosen a
4 quatro LNB dish kit with a multiswitch above.
Order Code OPT8010U2
Add £45.00
OR -
Choose any of the options above but provide
(for high wind and high salt locations) a Triax 90cm
heavy duty fibre glass dish instead of the Triax 80cm dish kit
This is a kit option only. ONLY select this option if you have already chosen a
4 quatro LNB dish kit with a multiswitch above.
Black 90cm dish -
Order Code OPTTFG92
Add £80.00
Cream 90cm dish -
Order Code OPTTFG9W2
Add £80.00
Remove wall mount from dish kit.
Order code DEDUCT
Deduct £10.00
Motorised Systems,
FREE INSTALLATION KIT WORTH about £40.00 included
with all motorised systems. For full details of kit contents,
CLICK
HERE
Included in our motorised kits is what we consider to be the best Diseqc motors available. The Technomate motors.
We have used these motors for many years and they have been utterly reliable. Even though the TM2300 has worked
perfectly with the larger 1.0m dish we are now packaging the 90cm and 1.0m dishes with the TM2600 motor.
The TM2300 motor uses ultra QUIET gears and unlike some motors there is no play in the Technomate motor from new.
Technomate motors also hang from above giving better dish clearance. The TM2600 uses metal gears and so it is now
packaged with the larger dishes. That being said the TM2300 was never a problem but for exposed locations the TM2600
should offer more strength. With dishes below 90cm we still believe that the best option is the very quite TM2300
motor which has already proved it's long term reliability in the past with dishes up to 1.0m Also note that we do
not recommend the use of Diseqc motors on steel dishes over 90cm or aluminium dishes over 1.0m.
For larger dishes use a 36-volt motor and a
V Box.
The heavier duty 36-volt motor dish kits (1.2m, 1.5m and 1.8m dishes) are below the Diseqc motor dishes.
Add an 80cm motorised dish
kit to my receiver. Triax or Orbital.
Triax TD78 80cm Triax motorised dish with Technomate motor & 0.1dB LNB.
Orbital aluminium 80cm motorised dish with Technomate motor & 0.1dB LNB.
Included is the Smart Titanium LNB from "Smart Electronic GmbH" in Germany. Smart also make
professional meters and
diseqc switches.
This new Titanium LNB is the third edition that is widely praised on many web sites. It has the gold
connections and is very low noise. An ultimate performance LNB. Ideal for situations where the maximum dish size cannot
be increased. This LNB has a high output and so it is also very good for long cable runs, e.g. longer than 35m
In the comparative LNB test in April 08 What Satellite magazine, the second edition (0.2dB) LNB performed
best of all. This new Titanium 0.1dB third edition LNB improves on the previous model.
Also included is the very reliable Technomate motor.
It is possible to upgrade the single LNB to a twin, quad, octo LNB
using the LNB upgrade options
A
free fitting kit with detailed instructions is included with all full motorised systems.
It is worthwhile checking out our
support page page (especially if you plan to do the fitting yourself)
and the
wall mounts and ground stands page. This dish requires a 50mm diameter pole,
wall mount (or ground stand) but also see the
special offer T Mount below.
Shipping options. Discounted shipping on all web orders.
UK -
mainland UK delivery is included in the price, (
VAT info.) (
Stock levels.)
so choose "
Mainland UK delivery included" - UK shipping option No 1 (or
priority options 4-7).
For "
UK offshore islands including Northern Ireland by courier" systems up to 1.0m choose the £15 - UK shipping option No 2.
International - Republic of Ireland - systems up to 1.0m - choose the £15 "
fixed price multiple items to Eire" shipping option
International - within the EU - systems up to 1.0m - choose the £59 "
2 boxes up to 40Kg by courier to EU countries" shipping option
International - outside of the EU - all dishes/sizes - choose the "
International shipping quote by e-mail" shipping option.
Add a Primesat transparent 85cm Diseqc
motorised dish kit to my receiver.
Clear 85cm motorised dish with Technomate motor and 0.1dB LNB.
The Primesat clear dish is ideal for conservation areas or customers who would like a motorised dish that is not very noticeable.
Included is the Smart Titanium LNB from "Smart Electronic GmbH" in Germany. Smart also make
professional meters and
diseqc switches.
This new Titanium LNB is the third edition that is widely praised on many web sites. It has the gold
connections and is very low noise. An ultimate performance LNB. Ideal for situations where the maximum dish size cannot
be increased. This LNB has a high output and so it is also very good for long cable runs, e.g. longer than 35m
In the comparative LNB test in April 08 What Satellite magazine, the second edition (0.2dB) LNB performed
best of all. This new Titanium 0.1dB third edition LNB improves on the previous model.
Also included is the very reliable Technomate motor.
It is possible to upgrade the single LNB to a twin, quad, octo LNB
using the LNB upgrade options
A
free fitting kit with detailed instructions is included with all full motorised systems.
It is worthwhile checking out our
support page page (especially if you plan to do the fitting yourself)
and the
wall mounts and ground stands page. This dish requires a 50mm diameter pole,
wall mount (or ground stand) but also see the
special offer T Mount below.
Shipping options. Discounted shipping on all web orders.
UK -
mainland UK delivery is included in the price, (
VAT info.) (
Stock levels.)
so choose "
Mainland UK delivery included" - UK shipping option No 1 (or
priority options 4-7).
For "
UK offshore islands including Northern Ireland by courier" systems up to 1.0m choose the £15 - UK shipping option No 2.
International - Republic of Ireland - systems up to 1.0m - choose the £15 "
fixed price multiple items to Eire" shipping option
International - within the EU - systems up to 1.0m - choose the £59 "
2 boxes up to 40Kg by courier to EU countries" shipping option
International - within the EU - systems up to 1.0m - choose the £69 "
3 boxes up to 60Kg by courier to EU countries" shipping option
International - outside of the EU - all dishes/sizes - choose the "
International shipping quote by e-mail" shipping option.
Add a Primesat 1.1m aluminium dish.
Low cost, high quality, high gain.
New product. Coming soon. First stocks - 3rd week in November.
Optional 0.1dB LNB and
Smart Titanium LNB and optional Primesat 430mm wall mount (or see
option).
This
aluminium dish has a total weight of only 7.5Kg. (A steel 1.1m weighs 11Kg.) The
gain is a massive 41.2dB at
12.75GHhz and the coating is Polyester RAL7035
powder coating. It is available in very dark grey (almost black).
The
easy adjust AZEL mount on the back of the dish (where elevation is adjusted) is
galvanised. It will clamp to poles
from 35mm to 60mm diameter.
Smart Titanium LNB from "Smart Electronic GmbH" in Germany. Smart also make
professional meters and
diseqc switches. This is the new Titanium third edition LNB that is widely praised on many
web sites. It has the gold connections and is very low noise. An ultimate performance LNB. Ideal for situations where
the maximum dish size cannot be increased. This LNB has a high output and so it is also very good for long cable runs,
e.g. longer than 35m. In the comparative LNB test in April 08 What Satellite magazine, the second edition (0.2dB) LNB
performed best of all. This Titanium 0.1dB third edition LNB improves on the previous model. The Technomate 2600
motor with metal gears is a very reliable motor. This 1.1m dish is ideal for many satellites when used in the UK.
It is possible to upgrade the single LNB to a twin, quad, octo LNB
using the LNB upgrade options
These upgrade options only apply if you are ordering a dish with a single LNB (you pay the difference in price - or less) They
do not apply if you are ordering a dish without an LNB. It is worthwhile checking out our
support page page (especially
if you plan to do the fitting yourself) and the
wall mounts and ground stands page. This motor will fit on a pole
of either 50mm or 76mm diameter. Also see the
special offer wall mount for 1.1m dishes.
Shipping information.
Please note that due to the large size (volume) of the 1.1m dish there are extra (top up) delivery charges for "out of area UK postcodes".
Most UK postcodes have no extra charges. Areas like the Scottish highlands are not covered. Therefore delivery
is included to
selected mainland UK postcodes. There is a £15.00 delivery charge to offshore islands including Northern
Ireland to
selected postcodes. If your postcode is not on the list, this may be because it is "outside of main city areas" and
so
click on the link here to see if your post code is covered. If your postcode is on the list, delivery charges are in "included to
mainland destinations" (but remember to select the £15 option for offshore islands). Postcodes are provided by "Parcelforce".
If your postcode is not on the list, you will need a shipping quotation. If you place an order, the shipping quote will be emailed
to you. You can then either accept the quote and pay at the link provided, or decline the quote and your order will be refunded, or,
you may prefer to email us for a quote on the
contact page. If your postcode is on the list please also note that next day
delivery is not available. This is a 48 hour "large item delivery service". Most UK postcodes are on the list.
Shipping options. Discounted shipping on all internet orders.
(
VAT info.) (
Stock levels.)
UK -
mainland UK delivery (selected postcodes only) is included in the price,
so choose "
UK mainland delivery included" - UK shipping option No 1.
Click here for
selected postcodes.
For "UK offshore islands including Northern Ireland by courier" to
selected postcodes choose the £15 - UK shipping option No 2.
For
all other UK destinations - choose shipping option 1. A shipping quotation will be emailed to you for a top up payment.
International - within the EU - 1.1m and 1.2m dishes - choose the £69 "
Oversized item to an EU destination"
shipping option
International - outside of the EU - all dishes/sizes - choose the "
International shipping quote by e-mail" shipping
option.
Add a Primesat 1.1m aluminium dish with Technomate TM2600 motor
and 0.1dB Titanium LNB
Click here to see a special offer, discounted
wall mount or check out
other wall mounts and ground stands.
New product. 1st stocks due on the 29th Nov 2013 but you can pre-order now.
Order code ADPR11M
Only £147.95
Add a Triax 90cm heavy duty fibre glass
dish with Technomate TM2600 motor.
and 0.1dB LNB.
Included is the Smart Titanium LNB from "Smart Electronic GmbH" in Germany. Smart also make
professional meters and
diseqc switches.
This new Titanium LNB is the third edition that is widely praised on many web sites. It has the gold
connections and is very low noise. An ultimate performance LNB. Ideal for situations where the maximum dish size cannot
be increased. This LNB has a high output and so it is also very good for long cable runs, e.g. longer than 35m
In the comparative LNB test in April 08 What Satellite magazine, the second edition (0.2dB) LNB performed
best of all. This new Titanium 0.1dB third edition LNB improves on the previous model.
Also included is the very reliable Technomate motor. This is a heavy duty high wind load dish kit ideal
for use in high salt "near the coast" locations. Clearly the fibre glass dish cannot corrode and the mount
on the back uses a much heavier gauge steel. This is a very high quality dish kit. The kit includes Triax
heavy duty fibre glass dish with 0.1dB LNB and Technomate TM2600 motor.
It is possible to upgrade the single LNB to a twin, quad, octo LNB
using the LNB upgrade options
A
free fitting kit with detailed instructions is included with all full motorised systems.
It is worthwhile checking out our
support page page (especially if you plan to do the fitting yourself)
and the
wall mounts and ground stands page. This dish requires a 50mm diameter pole,
wall mount (or ground stand) but also see the
special offer T Mount below.
Available in black or cream
Shipping options. Discounted shipping on all web orders.
UK -
mainland UK delivery is included in the price, (
VAT info.) (
Stock levels.)
so choose "
Mainland UK delivery included" - UK shipping option No 1 (or
priority options 4-7).
For "
UK offshore islands including Northern Ireland by courier" systems up to 1.0m choose the £15 - UK shipping option No 2.
International - Republic of Ireland - systems up to 1.0m - choose the £15 "
fixed price multiple items to Eire" shipping option
International - within the EU - systems up to 1.0m - choose the £69 "
3 boxes up to 60Kg by courier to EU countries" shipping option
International - outside of the EU - all dishes/sizes - choose the "
International shipping quote by e-mail" shipping option.
Heavy duty motorised dish kits and larger dishes.
In exposed locations and with larger dishes it is best to use heavier duty 36-volt motors. 36-volt
motors are larger and more powerful. This extra power comes from the V Box (a type of power supply) and a 4-wire
control cable. It all works automatically with the receivers own remote control.
Our recommendations.
1. In very high wind load situations use a 36-volt motor kit.
2. In all other situations the excellent Technomate Diseqc motor shown in the kits above is fine up
to 90cm steel dishes and up to 1.0m aluminium dishes but for larger dishes, heavier 36-volt motors
must be used. Remember, with big dishes, big lumps of metal (heavy motors) are needed to withstand winds,
not software and promises!
These are 36-volt motorised dish kits.
Add a 1.2m Raven (Andrews) dish.
with heavy duty motor.
The Raven (Formally "Andrews" and before that "Channel Master") 1.2m dish. "Probably the best 1.2m dish in the world"
The one piece reflector is thermoset-molded glass fiber reinforced polyester for strength and rigidity and surface accuracy.
An ultimate dish system for enthusiasts. Gain 42.0 dBi at 11.95Ghz. 3dB beamwidth - 1.6 degrees. Cross polarisation - 30dB.
The new
Primesat CH12MK4 heavy duty polar mount and actuator is designed for
the 1.2m Raven dish.
The new Mk 4 has been completely redesigned compared to earlier versions. This mount is produced by our sister company
www.primesat.eu
for the Satellite Superstore. It is designed for the 1.2m Raven dish (dish not included). This mount
is very well designed. The dish does not stand a long was away from the pole. With this latest Mk 4 version, the mount is a
close and well balanced assembly. The framework is very strong and well engineered. Fine adjustment is easy with a spanner.
Primesat CH12MK4 heavy duty polar mount and actuator. The polar mount is "dipped galvanised". The "dish back plate frame"
is now also dipped galvantised. This provides a long term durable finish especially in high salt areas. All of the nuts
and bolts are made of stainless steel except the main elevation and declination adjusters which are made of brass.
The polar mount includes a frame that is designed to fit on the back of the Raven 1.2m dish using the 4 bolts
that come with the Raven dish. An genuine
Jaeger Superjack 18" actuator is
included. This dish / polar mount motor unit
is designed to clamp onto a 76mm (3-inch) diameter pole. An ideal ground stand is the
Primesat GS761FW3
stand but see a
discounted option below. An ideal wall mount is the
Primesat WMS45076
mount.
4 core motor control cable for
this motor is in the
free fitting kit. This heavy duty polar mount and actuator can take high wind loads.
The Titanium 0.1dB LNB is a high performance low noise LNB. This is the new third edition LNB that is widely praised on many
web sites. It has the gold connections and is very low noise. An ultimate performance LNB. In the May 08 issue of "What Satellite" the
2nd edition Titanium LNB won the group test. The 3rd edition is even better. Using a Diseqc receiver, a V box is also needed. See more
details at
V Box This converts Diseqc commands to 36 volt positioning and is fully automatic. It also introduces more
power to drive
heavier duty 36 volt motors. See
Wall mount options and the discounted
ground stand below. Also see the matched feedhorn options
below. The
Raven (Andrews) matched feed options below work very well with this dish. They should provide the
best possible signal.
See the Twin, Quad, and quatro C120 LNB feedhorn options below. This dish kit is discounted compared to buying the items separately.
Shipping information.
Please note that due to the large size (volume) of the 1.2m dish there are extra (top up) delivery charges for "out of area UK postcodes".
Most UK postcodes have no extra charges. Areas like the Scottish highlands are not covered. Therefore delivery
is included to
selected mainland UK postcodes. There is a £15.00 delivery charge to offshore islands including Northern
Ireland to
selected postcodes. If your postcode is not on the list, this may be because it is "outside of main city areas" and
so
click on the link here to see if your post code is covered. If your postcode is on the list, delivery charges are in "included to
mainland destinations" (but remember to select the £15 option for offshore islands). Postcodes are provided by "Parcelforce".
If your postcode is not on the list, you will need a shipping quotation. If you place an order, the shipping quote will be emailed
to you. You can then either accept the quote and pay at the link provided, or decline the quote and your order will be refunded, or,
you may prefer to email us for a quote on the
contact page. If your postcode is on the list please also note that next day
delivery is not available. This is a 48 hour "large item delivery service". Most UK postcodes are on the list.
Shipping options. Discounted shipping on all internet orders.
(
VAT info.) (
Stock levels.)
UK -
mainland UK delivery (selected postcodes only) is included in the price,
so choose "
UK mainland delivery included" - UK shipping option No 1.
Click here for
selected postcodes.
For "UK offshore islands including Northern Ireland by courier" to
selected postcodes choose the £15 - UK shipping option No 2.
For
all other UK destinations - choose shipping option 1. A shipping quotation will be emailed to you for a top up payment.
International - within the EU - 1.1m and 1.2m dishes - choose the £69 "
Oversized item to an EU destination"
shipping option
International - outside of the EU - all dishes/sizes - choose the "
International shipping quote by e-mail" shipping
option.
Add a 1.2m Raven dish, h/duty polar mount, 18-inch actuator, Titanium LNB with V box.
Order code ADPM12V
Add £474.95
Dish option - Raven (Andrews) feedhorn
with Inverto C120 LNB
23mm to 40mm spacers included. In stock and ready for immediate shipping. Andrews feedhorn for
all Andrews offset dishes. works best with the 1.2m, 1.8m and 2.4m Andrews dishes. Highly recommended
with these dishes. Use this feedhorn with a C120 flange LNB for better matching & higher gain than a
40mm clamp LNB of equivalent noise level. Why buy a high quality Raven dish and use a compromise
40mm mass market LNB where the feed is made for
ANY dish?
Taking a 1.2m dish as an example - A 40mm LNB may only illuminate 1.1m of dish area or perhaps 1.3m
of dish area (i.e. including noise round the edges) but with a matched feedhorn, exactly 1.2m of dish
area is illuminated. This feedhorn is for offset dishes and can also be used on other makes of offset
dish. It comes with adapters for either 23mm or 40mm clamps and it comes with the ultimate 0.3 dB
Inverto LNB. The best combination money can buy. And YES !! We do have Raven feedhorns in stock.
Inverto LNBs are high output LNBs and work better than Invacom LNBs when the cable run is long.
(Under 20m the performance is the same but over 20m it is better)
This is a dish Option.
NO NOT buy from this page unless you are buying an Raven dish kit.
Include a matched Raven Feedhorn with C 120 Inverto 0.3dB LNB instead of a single 40mm LNB
Discounted option price. To buy this feed and LNB separately, go to the
Feedhorn page.
Dish Option - Andrews matched feed option with single C120 LNB.
Order code SOFEOPT
Add only £69.95
Dish Option - Raven matched feed option with twin C120 LNB.
Order code TWFEOPT
Add only £85.00
Dish Option - Raven matched feed option with quad C120 LNB.
Order code QUFEOPT
Add only £99.00
Dish Option - Raven matched feed option with quatro C120 LNB.
Order code QOFEOPT
Add only £99.00
System option. Add a 76mm 1m high ground stand to this system.
(Discounted.)
Manufactured by the Satellite Superstore.
This option is only available if you are buying the dish kit above.
For 1.2 - 1.5m dishes use 6 feet (studs). 6 adjustable feet are included. Discounted price when ordered with dish.
To buy this ground stand on it's own (not with a system) go to the
ground stand page
Order code OPTGR76
£149.95
Add a Primesat 1.4m 36v motorised
dish with feedhorn & Invacom LNB.
At last a high gain high quality prime focus dish.
In the early days of satellite most dishes were prime focus. These days most dishes are offset.
It is two ways of doing the same job but prime focus dishes point upwards and look purposeful.
From the appearance point of view they are usually the enthusiast favorite. This one is
made of aluminuim and is one piece. (As a general rule, aluminium is preferable to steel
and 1-piece tends to be more efficient that "petalised" or segments.) This attractive dish
comes complete with a very heavy duty fixed mount, a prime focus Invacom adjustable feedhorn
with yellow cap and Invacom LNB. This dish fits on a 76cm diameter pole.
The polar mount is "dipped galvanised" which is the best possible type of treatment for
withstanding corrosion in high salt areas. Everything about this dish is high quality.
All of the nuts and bolts are made of stainless steel except the main elevation adjuster which is made of brass.
This heavy duty polar mount comes complete with an 18 inch actuator and a
V Box.
A suitable 1m high 76mm diameter pole ground stand is on our
ground
stands page
A possible wall mount (depending on stand off distance required) is on our
wall mounts page
The dish is availble with a single, twin, quad, or quatro LNB. See options below.
Shipping information.
Please note that due to the large size (volume) of the 1.4m dish there are extra (top up) delivery charges for "out of area UK postcodes".
Most UK postcodes have no extra charges. Areas like the Scottish highlands are not covered. Therefore delivery
is included to
selected mainland UK postcodes. There is a £15.00 delivery charge to offshore islands including Northern
Ireland to
selected postcodes. If your postcode is not on the list, this may be because it is "outside of main city areas" and
so
click on the link here to see if your post code is covered. If your postcode is on the list, delivery charges are in "included to
mainland destinations" (but remember to select the £15 option for offshore islands). Postcodes are provided by "Parcelforce".
If your postcode is not on the list, you will need a shipping quotation. If you place an order, the shipping quote will be emailed
to you. You can then either accept the quote and pay at the link provided, or decline the quote and your order will be refunded, or,
you may prefer to email us for a quote on the
contact page. If your postcode is on the list please also note that next day
delivery is not available. This is a 48 hour "large item delivery service". Most UK postcodes are on the list.
Shipping options. Discounted shipping on all internet orders.
(
VAT info.) (
Stock levels.)
UK -
mainland UK delivery (selected postcodes only) is included in the price,
so choose "
UK mainland delivery included" - UK shipping option No 1.
Click here for
selected postcodes.
For "UK offshore islands including Northern Ireland by courier" to
selected postcodes choose the £15 - UK shipping option No 2.
For
all other UK destinations - choose shipping option 1. A shipping quotation will be emailed to you for a top up payment.
International - all destinations - choose the "
International shipping quote by e-mail" shipping
option.
Add a Primesat 1.4m dish 36v motorised with V Box, Invacom feedorn
and Invacom single C120 LNB.
Order code ADDPRIV
Only £569.95
1.4m motorised dish feedhorn options.
Invacom feedhorn with Invacom C120 LNB options
When ordering the 1.4m dish above which includes a matched feedhorn you may wish to change
the LNB from a single C120 LNB in your order option to a twin, a quad or a quatro LNB.
We can take out the single C120 LNB, change it and charge you the difference in price.
Buying these LNBs separately without also buying the 1.4m dish kit should only be done from the
LNB page.
Dish Option - Change the single C120 LNB to a twin Invacom C120 LNB.
Order code OPTC1MT
Add only £5.00
Dish Option - Change the single C120 LNB to a quad Invacom C120 LNB.
Order code OPTC1MQ
Add only £20.00
Dish Option - Change the single C120 LNB to a quatro Invacom C120 LNB.
Order code OPTC1MM
Add only £12.00
System option. Add a 76mm 1m high ground stand to this system.
(Discounted.)
Manufactured by the Satellite Superstore.
This option is only available if you are buying the dish kit above.
For 1.2 - 1.5m dishes use 6 feet (studs). 6 adjustable feet are included. Discounted price when ordered with dish.
To buy this ground stand on it's own (not with a system) go to the
ground stand page
Order code OPTGR76
£149.95
Add a Primesat 1.8m 36v motorised
dish with feedhorn & Invacom LNB.
(Or scroll down for Raven 1.8m.)
At last a high gain high quality prime focus 1.8m dish.
In the early days of satellite most dishes were prime focus. These days most dishes are offset.
It is two ways of doing the same job but prime focus dishes point upwards and look purposeful.
From the appearance point of view they are usually the enthusiast favorite. This one is
made of aluminium and is one piece. (As a general rule, aluminium is preferable to steel
and 1-piece tends to be more efficient that "petalised" or segments.) This attractive dish
comes complete with a very heavy duty polar mount, a prime focus Invacom adjustable feedhorn
with yellow cap and Invacom LNB. This dish fits on a 76cm diameter pole.
The polar mount is "dipped galvanised" which is the best possible type of treatment for
withstanding corrosion in high salt areas. Everything about this dish is high quality.
All of the nuts and bolts are made of stainless steel except the main elevation adjuster which is made of brass.
Technical - F/D Ratio - 0.41, Gain @ 10.95 GHz 44.8 dB, Gain @ 11.70 GHz 45.6 dB, Gain @ 12.70 GHz 46.4 dB
This heavy duty polar mount comes complete with an 18 inch actuator and
V Box.
A suitable stand for the 1.8m dish is a 1.25m high 76mm diameter pole ground stand is on our
ground
stands page
These dishes are available with a single, twin, quad, or quatro LNB. See options below.
Shipping options. Discounted shipping on all web orders.
UK - When you add a this dish kit to your receiver choice,
mainland UK delivery is still included in the price,
so choose "
Mainland UK delivery included" - UK shipping option No 1.
Or for "
UK offshore islands (and Eire) by courier" - oversized delivery - quote by e-mail (or ring us).
All internationals - Within the EU or outside of the EU - choose the "
International quote by e-mail"
shipping option.
Add a Primesat 1.8m dish 36v motorised with V Box, Invacom feedorn
and Invacom single C120 LNB.
Order code OPTP18V
Only £899.95
1.8m motorised dish feedhorn options.
Invacom feedhorn with Invacom C120 LNB options
When ordering the 1.8m dish above which includes a matched feedhorn you may wish to change
the LNB from a single C120 LNB in your order option to a twin, a quad or a quatro LNB.
We can take out the single C120 LNB, change it and charge you the difference in price.
Buying these LNBs separately without also buying the 1.8m dish kit should only be done from the
LNB page.
Dish Option - Change the single C120 LNB for a twin Invacom C120 LNB.
Order code OPTC1MT
Add only £5.00
Dish Option - Change the single C120 LNB for a quad Invacom C120 LNB.
Order code OPTC1MQ
Add only £20.00
Dish Option - Change the single C120 LNB for a quatro Invacom C120 LNB.
Order code OPTC1MM
Add only £12.00
Dish option - Primesat C Band and Ku band option.
Change the Invacom feedhorn and c120 LNB for a combined C Band and Ku band feedhorn and KNB kit.
Note. The feed support boss on this dish is adjustable from 23mm through 40mm to 60mm and so fitting
60mm C band LNBs or combined C and KU band LNBs is not a problem.
The Ku band LNB is a universal LNB. More details on the
C Band Page.
Order code OPTCKUP
Add only £40.00
Option - Ground Stand for the
1.8m motorised Primesat dish
Manufactured by the Satellite Superstore.
This is our own stand. It is 1.25m high and uses a 76mm (3.0") pole.
Heavy 6mm thick angle is used along the base and the angle dimensions are 60mm by 60mm.
There are 12 holes for fixing down to concrete or paving. 4 in each angle. See bottom left picture.
It is etch-primed and pained black. The final coat of paint is baked in an oven for a hard finish.
The stand is bolted together to make it easy to ship. Multiple bolts are used for maximum rigidity.
The stand is heavy but it needs to be. This stand is designed for our motorised version of the 1.8m
Primesat dish. This stand is at a discounted price when you buy it with the 1.8m motorised dish kit.
Dish option. Ground Stand for the 1.8m Primesat dish. 76mm (3.0-inch) diameter pole
Order code OPT18GM
£299.95
Option. 3 adjustable feet for motorised use.
This is a worthwhile option (discounted price) when ordering a 76mm (3-inch) ground stand. Feet are not included as
standard with the stand above. Using the 1.8m stand above, for motorised use, to make the pole plumb, we would
recommend at least 6 feet and preferable 9 although up to 12 can be used. It will therefore be necessary to add
this option more than once. Manufactured by the Satellite Superstore. An exclusive high quality product.
Order code EXTRAF3
Add only £30.00 for 3 feet
Add a heavy duty Raven 1.8m
motorised dish kit to my receiver.
Heavy duty Raven 1.8m motorised dish kit including a polar mount which is designed and built by the
Satellite Superstore, heavy duty actuator and Raven matched feedhorn with C120 0.2dB Inverto LNB.
This is a Raven (formerly Andrews and before that Channel Master) 1.8m dish.
Very high gain one piece proven design. The motor unit is a Primesat CH18MK2 polar mount and Jaeger
Superjack actuator. The polar mount is dipped galvanised with a steel back plate to fit the Raven 1.8m dish.
All of the bolts and nuts are stainless steel and the elevation adjusters are made of brass.
A 24-inch heavy duty Jaeger Superjack QARL3624 actuator is included.
The complete motor kit is also available separately on our
motors
page
A matched Raven feedhorn is highly recommended for this Raven 1.8m dish. Using this feedhorn with a
C120 flange LNB provides better matching and more good signal (a higher signal to noise ratio) than
a standard 40mm clamp LNB. It is best not to invest in a high quality Raven dish and use a compromise
40mm mass market LNB where the integrated feedhorn is designed for
ANY dish but is not matched?
Taking this 1.8m dish as an example, a 40mm LNB may only illuminate 1.7m of dish area or perhaps
1.9m of dish area (i.e. including noise from round the edges) but with a matched feedhorn, exactly
1.8m of dish area is illuminated. A high output 0.2dB C120 Inverto LNB included
(good for longer cable runs). Twin, quad and quatro C120 LNBs are optional. The one piece reflector
is thermoset-molded glass fiber reinforced polyester for strength and rigidity and surface
accuracy. An ultimate dish system for enthusiasts.
For use with a Diseqc receiver, a
V Box is also included. This converts Diseqc commands to 36-volt
positioning and is fully automatic. it also introduces more power to drive the heavier duty 36 volt motor.
We include a V box option below at a discounted price. The polar mount collar fits a 3 inch (76mm) pole
or ground stand. Also see the discounted heavy duty
ground stand option below.
You can change the single c120 LNB to a
twin,
a
quad,
or a
quatro C120 LNB with one of the options below.
Free fitting kit with detailed instructions included with all full motorised systems included.
It is worthwhile checking out our
support page page (especially if you plan to do the fitting
yourself)
Shipping options. Discounted shipping on all web orders.
UK - When you add a this dish kit to your receiver choice,
mainland UK delivery is still included in the price,
so choose "
Mainland UK delivery included" - UK shipping option No 1.
Or for "
UK offshore islands (and Eire) by courier" - oversized delivery - quote by e-mail (or ring us).
All internationals - Within the EU or outside of the EU - choose the "
International quote by e-mail"
shipping option.
Note that to most international EU destinations (including Eire,) delivery is about £225.00
Add a Raven (Andrews) 1.8m dish, polar mount, 18-inch H/D actuator,
feed and C120 LNB & V Box
Order code AD18M36
Add only £1279.95
1.8m motorised dish feedhorn options.
Raven feedhorn with Inverto C120 LNB options
When ordering the 1.8m dish above which includes a matched feedhorn you may wish to change
the LNB from a single C120 LNB in your order option to a twin, a quad or a quatro LNB.
We can take out the single C120 LNB, change it and charge you the difference in price.
Buying these LNBs separately without also buying the 1.8m dish kit should only be done from the
LNB page.
Feedhorn Option - Change the single C120 LNB for a twin Inverto C120 LNB.
Order code OPTC12T
Add only £12.00
Feedhorn Option - Change the single C120 LNB for a quad Inverto C120 LNB.
Order code OPTC12Q
Add only £27.00
Feedhorn Option - Change the single C120 LNB for a quatro Inverto C120 LNB.
Order code OPTC12M
Add only £27.00
Option - Ground Stand for the
1.8m motorised Raven dish
Manufactured by the Satellite Superstore.
This is our own stand. It is 1.25m high and uses a 76mm (3.0") pole.
Heavy 6mm thick angle is used along the base and the angle dimensions are 60mm by 60mm.
There are 12 holes for fixing down to concrete or paving. 4 in each angle. See bottom left picture.
It is etch-primed and pained black. The final coat of paint is baked in an oven for a hard finish.
The stand is bolted together to make it easy to ship. Multiple bolts are used for maximum rigidity.
The stand is heavy but it needs to be. This stand is designed for our motorised version of the 1.8m
Raven dish. This stand is at a discounted price when you buy it with the 1.8m motorised dish kit.
Dish option. Ground stand for the 1.8m Raven dish. 76mm (3.0-inch) diameter pole
Order code OPT18GM
Add only £299.95
Option. 3 adjustable feet for motorised use.
This is a worthwhile option (discounted price) when ordering a 76mm (3-inch) ground stand. Feet are not included as
standard with the stand above. Using the 1.8m stand above, for motorised use, to make the pole plumb, we would
recommend at least 6 feet and preferable 9 although up to 12 can be used. It will therefore be necessary to add
this option more than once. Manufactured by the Satellite Superstore. An exclusive high quality product.
Order code EXTRAF3
Add only £30.00 for 3 feet
Discounted wall mount options.
50mm diameter pole south facing wall mount (T Mount).
480mm stand off.
This mount is ideal for use with fixed or motorised dishes of 90cm, 1.0m or 1.1m and for use with Diseqc motors.
This mount is not manufactured by Satellite Superstore (the
heavy duty mounts are) but it is one of the best
mounts we have seen. Not as heavy duty as our own but in all but the most exposed locations it will be fine.
It is protected by a good galvanising process. It only uses 6 bolt holes and it is a strong low cost solution
for most situations. 50mm (2") diameter mast and 480mm stand-off. Suitable for dishes up to 1.1m. 6 bolt fixing.
This is ideal for use with the Technomate Diseqc motor in the motorised kits above. If you are NOT adding this
item to a dish system (Or you need a heavy duty mount or ground stand) then order it separately from the
wall mounts and ground stands page. Note. THIS IS A SYSTEM OR DISH KIT OPTION ONLY
Dish kit or system option. 50mm Diameter south facing wall mount (T Mount).
System or dish kit option only. To order separately, order from the
wall mounts and ground stands page.
Order code OPTTMOU
Add only £19.95 (Discounted)
System option Only. Elbow 1D. Ideal for dishes up to 85cm.
4 bolt fixing. 50mm pole diameter. 43cm stand off.
System or dish kit option only. To order separately, order from the
wall mounts and ground stands page.
Order code ADD1DOP
Add only £12.95
50mm Diameter Pole South facing wall mount (Large Elbow).
480mm stand off.
(If used with a 90cm - 1.1m dish this larger stand off allows the dish to be at right angles to the wall.)
This mount is not manufactured by Satellite Superstore (the
heavy duty mounts are) but it is one of the best mounts we have seen.
Not as heavy duty as our own but in all but the most exposed locations it is fine. The square plate is larger than plates fitted
to most elbow mounts. It is constructed with electroplated steel It only uses 6 bolt holes and it is a strong low cost solution
for most situations. 50mm (2") dia. mast. 480mm stand-off. Suitable for dishes up to 1.1m. 6 bolt fixing. Coach bolts and plugs
for fixing on the wall are available from the
satellite cable page (6 required) This mount is also ideal for use
with the Technomate diseqc motor in the motorised dish kits.
50mm Diameter south facing wall mount (Large 6 bolt fixing Elbow).
Dish kit or system option. Large Elbow 1DL. 6 bolt fixing. 48cm stand off.
Order code ADD1DLA
ONLY £19.95
Channel Data Programming options
Option. Astra 2 programming option.
Programming option. Astra 2 at 28E Digital receivers are normally empty of all channels.
You scan them in when you connect to the satellite. We can take the receiver out of the box,
connect it to a dish and tune in the satellite for only £11.95
If you are buying a complete system, this option also helps take some of the work
out of the system setting up process as to tune channels a dish first needs setting up.
The pre-programmed channels are useful to help set up the dish if you are using a budget meter.
You are not on satellite to scan the channels and you cannot find the satellite as there are no
channels scanned in to help you.
A programmed receiver breaks the circle and helps to set up and install a system.
Astra 2 plug in and use programming option
Order code PRO1SAT
Add only £11.95
Option. Hotbird programming options.
Digital receivers are normally empty of all channels. You scan them in when you connect to the satellite.
We can take the receiver out of the box, connect it to a dish and tune in two satellites for only
£11.95 We then move and arrange the channels into a logical order.
Some good free channels are moved to the start of each satellite.
Channels are moved into their packages.
If required, adult channels are grouped together near the start of the Hotbird list.
If you are buying a complete system, this option also helps take some of the work out
of the system setting up process as to tune channels a dish first needs setting up,
But the channels are useful to help set up the dish! Chicken and egg situation.
You are not on satellite to scan the channels and you cannot find the satellite
as there are no channels scanned in!
A programmed receiver breaks the circle and helps to set up and install a system.
Plug in and use channel data programming option
Hotbird programming option 1.
Order code HOTPROG
ADD only £11.95
Hotbird programming option 2.
Adult channels grouped at the start of the list.
Order code HOTPROA
ADD only £11.95
Option. Astra 1 programming option.
Programming option. Astra 1 at 19E Digital receivers are normally empty of all channels.
You scan them in when you connect to the satellite. We can take the receiver out of the box,
connect it to a dish and tune in the satellite for only £11.95
If you are buying a complete system, this option also helps take some of the work
out of the system setting up process as to tune channels a dish first needs setting up.
The pre-programmed channels are useful to help set up the dish if you are using a budget meter.
You are not on satellite to scan the channels and you cannot find the satellite as there are no
channels scanned in to help you.
A programmed receiver breaks the circle and helps to set up and install a system.
Astra 1 plug in and use programming option
Order code PROAST1
Add only £11.95
Option. 2 satellite channel data programming options.
Digital receivers are normally empty of all channels. You scan them in when you connect to
the satellite. We can take the receiver out of the box, connect it to a dish and tune in two
satellites for only £11.95 We then move and arrange the channels into a logical order. Some
good free channels are moved to the start of each satellite. Channels are moved into their
packages. If you are buying a complete system, this option also helps take some of the work
out of the system setting up process as to tune channels a dish first needs setting up.
The pre-programmed channels are useful to help set up the dish if you are using a budget meter.
You are not on satellite to scan the channels and you cannot find the satellite as there are no
channels scanned in to help you.
A programmed receiver breaks the circle and helps to set up and install a system.
2 SAT plug in and use programming options -
Load channel data for Astra 1 at 19E and Hotbird at 13E
Order code PRO2SAT
Add only £11.95
Load channel data for 19E and 16E
Order code 1916CHD
Add only £11.95
Load channel data for 13E and 16E
Order code 1316CHD
Add only £11.95
Load channel data for 13E and 9E
Order code 1309CHD
Add only £11.95
Load channel data for Astra 2 at 28E and Hotbird at 13E
Order code 2813CHD
Add only £11.95
Load channel data for Astra 2 at 28E and Astra 1 at 19E
Order code 2819CHD
Add only £11.95
Load channel data for Astra 2 at 28E and 16E
Order code 2816CHD
Add only £11.95
Option. Astra 2, Astra 1 & Hotbird programming option.
Programming option. 28E, 19E and 13E. Digital receivers are normally empty of all channels.
Channels are scanned in when you connect the receiver to the satellite dish. We can take the
receiver out of the box, connect it to a dish and tune in three satellites for only £14.95. We
then move and arrange the channels into a logical order. Some good free channels are moved to
the start of each satellite. Channels are moved into their packages. Adult channels are grouped
together near the start of the Hotbird. If you are buying a complete system, this option also
helps take some of the work out of the system setting up process as to tune channels a dish
first needs setting up. The pre-programmed channels are useful to help set up the dish if you
are using a budget meter. You are not on satellite to scan the channels and you cannot find the
satellite as there are no channels scanned in to help you.
A programmed receiver breaks the circle and helps to set up and install a system.
3 SAT plug in and use programming option
Order code PR3SATE
Add only £14.95
Option. 28E, 19E, 16E & 13E programming option.
Programming option. 28E, 19E, 16E and Hotbird. Digital receivers are normally empty of all channels.
You scan them in when you connect to the satellite. We can take the receiver out of the box,
connect it to a dish and tune in 4 satellites for only £16.95 We then move and arrange the
channels into a logical order. Some good free channels are moved to the start of each satellite.
Channels are moved into their packages. Adult channels are grouped together near the start of
the Hotbird. If you are buying a complete system, this option also helps take some of the work
out of the system setting up process as to tune channels a dish first needs setting up.
The pre-programmed channels are useful to help set up the dish if you are using a budget meter.
You are not on satellite to scan the channels and you cannot find the satellite as there are no
channels scanned in to help you.
A programmed receiver breaks the circle and helps to set up and install a system.
2 SAT plug in and use programming option
Order code PR4SAT1
Add only £16.95
Option. 28E, 19E, 13E, 9E programming option.
Programming option. 28E, 19E, 9E and Hotbird. Digital receivers are normally empty of all channels.
You scan them in when you connect to the satellite. We can take the receiver out of the box,
connect it to a dish and tune in 4 satellites for only £16.95 We then move and arrange the
channels into a logical order. Some good free channels are moved to the start of each satellite.
Channels are moved into their packages. Adult channels are grouped together near the start of
the Hotbird. If you are buying a complete system, this option also helps take some of the work
out of the system setting up process as to tune channels a dish first needs setting up.
The pre-programmed channels are useful to help set up the dish if you are using a budget meter.
You are not on satellite to scan the channels and you cannot find the satellite as there are no
channels scanned in to help you.
A programmed receiver breaks the circle and helps to set up and install a system.
2 SAT plug in and use programming option
Order code PR4SAT2
Add only £16.95
Buying a fully loaded (programmed)
satellite receiver for motorised use.
This service is available for any motorised dish. If you are buying a system, or just a receiver
and you already have a motorised dish, we can take the receiver out of its box and fully program
it on one of our demonstration dishes. This would mean that the new programmed receiver can be
connected up by the customer and all the satellites channels will work straight away.
(Providing it is connected to a dish that is properly fitted, set up, and tracking the arc)
It would take a customer about many hours to program a receiver (since there would be
unfamiliarity with the installation menu system). After programming, the channels are then organised
in a logical order. (This is what takes the most time.) We make sure the first channel on every
satellite is a clear free to air unscrambled channel. Channels are organised into a logical order.
e.g. Adult channels all together etc. Movie packages .. etc. Moving all of the channels into a
logical order can take days. This programming is ONLY £19.95 This service is entirely optional
but for mail order customers it can take a great deal of the worry and uncertainty out of a
purchase. The programmed receiver is supplied without dish positions to be used with any dish.
Only the positions and the limits need to be added. This is a 10 minute job. This option is
ideal if you are buying a full motorised system and you intend to fit it yourself.
This option helps a great deal. It also makes it easier to install a motorised dish as channels
already loaded can help identify the satellite if a budget satellite meter is being used. Detailed
installation notes written by us are included and we can talk you through the installation
over the phone if required. See our support package on our
support page.
Our notes guide you through how to connect a programmed receiver, and setting the positions.
In addition, useful easy to follow notes on blind searching written by us are included for
future reference. For international orders, this option has one other worthwhile purpose.
The receiver is fully tested before shipping while it is being programmed.
Motorised receiver full programming option
Order code MOTPROG
Add only £19.95
LNB Upgrades.
These options are for standard dishes (including clear dishes) not Sky mini dishes.
Change the single LNB to a different make
(Please note that we can't put a zero into the shopping cart so the option is charged at 1p)
This is a system option where we take out one LNB and substitute in a different one.
If you want to buy this LNB but you are not buying a system as well, DO NOT add to cart.
The LNB must be bought from the
LNB page at the correct price. These are system options.
Change my 0.1dB LNB from the one quoted in my system to a Titanium 0.1dB single LNB
Order code OPTTIRM
£00.01
Change my 0.1dB LNB from the one quoted in my system to a Technomate 0.1dB LNB
Order code OPTCHTE
£00.01
Change my 0.1dB LNB from the one quoted in my system to an Icecrypt 0.1dB LNB
Order code OPTCHIC
£00.01
Upgrade a single LNB to 0.1dB Titanium award winning twin LNB
Award winning Titanium twin LNB - an ultimate performance LNB.
(e.g. Sky Plus / HD or freesat HDR twin tuner option.)
For use with multiple receivers on one fixed dish and also for a Triax multibracket option.
Using a twin LNB, a signal can be provided to 2 single tuner receivers or 1 twin tuner receivers.
This is the new Titanium third edition LNB that is widely praised on many web sites. It has the gold connections
and is very low noise. An ultimate performance LNB. Ideal for situations where the maximum dish size cannot be
increased. This LNB has a high output and so it is also very good for long cable runs, e.g. longer than 35m
In the comparative LNB test in April 08 What Satellite magazine, the second edition (0.2dB) LNB performed best
of all. This new Titanium 0.1dB third edition LNB improves on the previous model with an outstanding performance.
System option - Include an award winning Titanium 0.1dB LNB twin output LNB
instead of the LNB with my system.
Order code OPT0TTW
Add only £10.00
Upgrade a single LNB to a QUAD 0.1dB LNB
Award winning Titanium quad LNB - an ultimate performance LNB.
(e.g. Sky Plus / HD or freesat HDR twin tuner option.)
For use with multiple receivers on one fixed dish and also for a Triax multibracket option.
Using a quad LNB, a signal can be provided to 4 single tuner receivers or 2 twin tuner receivers.
This is the new Titanium third edition LNB that is widely praised on many web sites. It has the gold connections
and is very low noise. An ultimate performance LNB. Ideal for situations where the maximum dish size cannot be
increased. This LNB has a high output and so it is also very good for long cable runs, e.g. longer than 35m
In the comparative LNB test in April 08 What Satellite magazine, the second edition (0.2dB) LNB performed best
of all. This new Titanium 0.1dB third edition LNB improves on the previous model with an outstanding performance.
System option - Include an award winning Titanium 0.1dB quad LNB
instead of the LNB with my system.
Order code OPTT014
Add only £24.00
Upgrade a single LNB to a QUATRO LNB
This is the new Titanium third edition LNB that is widely praised on many web sites. It has the gold connections
and is very low noise. An ultimate performance LNB. Ideal for situations where the maximum dish size cannot be
increased. This LNB has a high output and so it is also very good for long cable runs, e.g. longer than 35m
In the comparative LNB test in April 08 What Satellite magazine, the second edition (0.2dB) LNB performed best
of all. This new Titanium 0.1dB third edition LNB improves on the previous model with an outstanding performance.
Dish kit option. - Include a Titanium 0.1dB Quatro LNB instead of the single LNB with my system.
Quatro LNBs are used to provide satellite signals to multiswitches
System option - Include a Titanium quatro LNB instead of the single LNB with my dish or system.
System option - Include an award winning Titanium 0.1dB quatro LNB
instead of the single LNB with my system.
Order code OPTT01M
Add only £18.00
Upgrade a single LNB to an
Octo Titanium LNB
Award winning Smart Titanium octo 0.1dB LNB.
This is the new Titanium third edition LNB that is widely praised on many web sites. It has the gold connections
and is very low noise. An ultimate performance LNB. Ideal for situations where the maximum dish size cannot be
increased. This LNB has a high output and so it is also very good for long cable runs, e.g. longer than 35m
In the comparative LNB test in April 08 What Satellite magazine, the second edition (0.2dB) LNB performed best
of all. This new Titanium 0.1dB third edition LNB improves on the previous model with an outstanding performance.
Using an octo LNB, a signal can be provided to 8 single tuner receivers or 4 twin tuner receivers.
(e.g. Sky HD or freesat HDR or other twin tuner receivers option.)
Also for use with multiple receivers on one fixed dish, also for a multibracket option
Supply up to 8 receivers with a signal from one satellite, or 4 twin tuner receivers like Sky + HD or freesat HDR.
System option - Include a Titanium 0.1dB Octo LNB
instead of the single LNB with my system.
Order code OPTT8OC
Add only £40.00
Upgrade a single Inverto narrow LNB to a twin narrow LNB
You may wish to upgrade every single LNB in the kit above. If so add this option more than once.
Additional Sky or Freesat option -
If you want to run a Sky Digibox or a Freesat box as well a standard multi-satellite receiver
using the one dish fitted with a multiconnect system, you need to add this twin option.
The twin LNB will be fitted in the Astra 2 (28E) position only. The standard multi-satellite receiver
will pick up the signal from the all 3 or 4 LNBs / satellites which would include one output from the
twin LNB. These will all go through the switch down one cable to that receiver. A second output of
the twin LNB can go down a another cable to the Sky or Freesat box.
The multisat system and Sky or freesat receivers then all work from one fixed dish.
This option is only available if you are also buying a kit above. To buy this LNB separely - go to the
twin LNB page.
Order code OPTNATW
Add only £10.00
Upgrade a single Inverto narrow LNB to a quad narrow LNB
You may wish to upgrade every single LNB in the kit above. If so add this option more than once.
Please note that if you are adding quad LNBs you also need the
expansion kit below.
Additional Sky or Freesat option -
If you want to run a Sky Digibox or a Freesat box as well a standard multi-satellite receiver
using the one dish fitted with a multiconnect system, you need to add this quad option.
The quad LNB will be fitted in the Astra 2 (28E) position only.
The standard multi-satellite receiver will pick up the signal from the all 3 or 4 LNBs / satellites
which would include one output from the quad LNB. These will all go through the switch down one
cable to that receiver. A second output of the quad LNB can go down a another cable to the Sky
or Freesat box. (or 2 outputs to a twin tuner Sky or Freesat box).
The multisat system and Sky or Freesat receivers then all work from one fixed dish.
This option is only available if you are also buying a kit above. To buy this LNB separely - go to the
quad LNB page.
Order code OPTNAQU
Add only £28.00
Upgrade a single Inverto narrow LNB to a quatro narrow LNB
You may wish to upgrade every single LNB in the kit above. If so add this option more than once.
BUT - please note that complete quatro LNB multiconnect kits with dishes are available below.
This option is only available if you are also buying a kit above. To buy this LNB separely - go to the
quatro LNB page.
Order code OPTNAQT
Add only £28.00
Long pole "above the gutter" wall
mounts for fixed dishes up to 1.0m
5 bolt fixing. Various stand off distances and 2 pole lengths - 1m and 2m. All pole diameters are 50mm
The poles are galvanised. the stand off distance is from the wall is to the inside of the pole.
If the dish is larger than 1.0m use a heavy duty "above the gutter" wall mount from our
wall mounts & ground stands page or a ground stand if applicable.
The following mounts are available from the
Wall mounts & ground stands page,
Long pole wall mount 1. Stand off - 300mm. 2m galvanised pole.
Order code LPMOUN1
Long pole wall mount 2. Stand off - 500mm. 2m galvanised pole.
Order code LPMOUN2
Long pole wall mount 3. Stand off - 300mm. 1m galvanised pole.
Order code LPMOUN3
Long pole wall mount 4. Stand off - 500mm. 1m galvanised pole.
Order code LPMOUN4
(All prices on this page include VAT.)
Links to site pages,
Advice
Support
Shipping info
Multiswitches
Satellite Museum
Reviews
Links
Satellite Finder Meters
Contact Us
SKY receivers & systems
SKY accessories
Other accessories
Installation equipment
Wall mounts & ground stands
Dishes
Transparent dishes
Full systems
Motorised systems.
2, 3 or 4 satellites on 1 fixed dish
BBC systems
Linux receivers
freesat receivers
Blind search receivers
Receivers with hard drives
Twin tuner PVR receivers
High Definition Receivers
Manhattan
Cube Revo
Icecrypt
Dreambox
Technomate
Humax
Analogue Receiver
More receivers
Caravan products
Diseqc switches
LNBs
Feedhorns
Motors
V Box
Positioners
Adult cards
CAMs
All products index
Links to menu pages,
Catalogue Contents Page. A summary of all pages. More products.
ADVICE Pages. Frequently Asked Questions. (FAQs) Read and learn!
Menu pages.
Sky menu page.
Satellite systems menu page.
Satellite receivers menu page.
Satellite dishes
Clear transparent dishes
High definition receivers menu page.
LNB (and feedhorns) menu page.
Motorised systems menu page.
Enthusiast blind search receiver menu page.
Manhattan menu page.
Humax menu page.
Technomate menu page.
Topfield receivers menu page.
Dreambox receivers menu page.
Pace receivers menu page.
Triax dishes, LNBs & brackets menu page.
Mutiswitches menu page.
3/4 satellite fixed dish menu page.
Small satellite items menu page.
Audio video products
Satellite Meters menu page.
Caravan Satellite menu page.
Accessories menu page.
Installation equipment menu page.
Review centre menu page.
Index of all products menu page.
Links to pages with more detail,
Catalogue Contents Page. A summary of all pages. More products.
ADVICE Pages. Frequently Asked Questions. (FAQs) Read and learn!
Freesat and Sky.
Freesat receivers / systems / mini dishes / accessories. The Humax HDR. The Segam.
The Sky Digital receivers / systems / mini dishes / accessories. The Pace DS440N. The Sky Plus.
Sky Digital accessories handsets, TV eyes, distribution around the house, wireless, offers, leads,
etc.
Sky Digital dishes and LNBs single, twin & 4 out LNBs, Zones 1 & 2 mini dishes & larger dishes.
Freesat and Sky in Spain. 1.0m, 1.2m, 1.8m and 2.4m dishes for Spain. Satellite meters for Spain.
Satellite Systems, Complete systems menu page
Sky systems.
Motorised systems.
(motors)
Hotbird 13E systems
(2 satellite) Astra 1 & Hotbird systems
(3/4 satellite) Astra 2, Astra 1 & Hotbird etc. systems.
God channel 28E systems
Free to air 28E BBC systems
Sky systems.
Sky + systems.
Adult channel systems
Manhattan motorised systems.
Icecrypt motorised systems.
Dreambox motorised.
Technomate satellite systems.
Satellite receivers,
Receiver menu page.
Sky Digital receivers
Freesat receivers
Blind search
Sky menu page
Sky Digiboxes
Sky Digibox.
Sky Plus.
Sky HD.
Caravan receivers
Technomate TM5200
TM5400
TM5300
TM5500.
TM9100
TM6900 HD Super.
TM6800 HD Super
TM7100.
Manhattan Plaza XT-M, XT-CM
SAB500Gb Twin Tuner
Brand new Analogue Receivers
Linux receivers
Cube Revo
Dreambox 600 800 8000
TM9100
PVR hard drive receivers or PVR ready
High Definition receivers menu page.
Humax iChord Twin Tuner PVR
Cube Revo Linux twin tuner PVR.
Technomate TM-6900 Super.
Technomate TM-6800 Super
Technomate TM-7100
Icecrypt S4000.
External USB hard drive for usb receivers
Vantage HD 8000
Dreambox 800
Freesat HD Receivers
Satellite dishes,
Dish menu page
LNB menu page
Sky dishes
Wall mounts
& stands
Feedhorns
FIXED,
Sky
Triax 54, 60,80,90cm,1.1m
Orbital 1.0m
Andrews 1.0m 1.2m,1.8m, 2.4m
Clear Transparent 60,85cm
MOTORISED,
Triax 80, 90cm,
Transparent 85cm
Orbital 1.0m
Andrews 1.0m, 1.2m, 1.8m
OTHER,
Sky mini dishes
All-weather Sky dishes
Sky dishes for Spain
3/4 satellite dishes
Dish motors
Caravan dishes
Terrestrial PVR receivers,
Topfield TF5810
Humax
Satellite & Terrestrial,
Technomate TM-6900 HD Combo.
Technomate TM-7100.
Brand New Analogue Satellite Receivers
(e.g. Could be used on Astra 1 to see Eurosport in English!)
Sky menu page
Adult Cards
CAMs
freesat receivers
LNBs
Monobocks
LNBs
Feedhorns
Sky accessories
Other Accessories
Installation equipment
Satellite Meters
Caravan
AV products.
See our new web site at-
www.primesat.eu
This site includes many products that are exclusive to the Satellite Superstore.
The site contains -
• Products that we manufacture (e.g. We have manufactured heavy duty wall mounts and ground stands since 1991).
• Selected products which have our own Primesat brand name and have been prepared to our specifications.
• Selected products where we have been appointed the authorised UK or European distributor by the manufacturer.
www.primesat.eu is an information site. Here you will find full specifications
and many detailed pictures. To buy any of these products, simply order them on this web site.
Contacting us.
Tel. (UK) 01207 544664 and 01207
544224
International Tel. + 44 1207 544664.
If you are ringing us about a product you have already purchased, you should ring the support line on your invoice.
Before sending questions via e-mail please check-out our
Frequently asked questions as this could save
time.
If you have any questions & comments regarding this site's content, please ....
contact us by e-mail.
(We only accept questions in English (no text language). We do not open attachments.)
Questions about faults or returns must include an invoice number or order number & date of purchase.
Technical questions are not a problem but questions about "channels" should be checked out first with
the satellite providers. Links to the satellite providers web sites are on our
Links Page
Copyright © 2012 Vision International. All rights reserved.
